[xNeo92x]

Hallo,
ich bin vor kurzem von Ubuntu 9.10 auf Linux Mint umgestiegen (is eigentlich ein und das selbe; ich weiß).
Jedenfalls hatte ich genug davon, dass dort ein ständig veralteter Kernel war. Ich hab also den 2.6.33 Kernel installiert und der PC startet auch fast normal. Nur beim starten kam ein Fehler, dass der NVIDIA Treiber nicht richtig funktioniert. Also hab ich ihn deinstalliert und hab neugestartet. Kein Fehler!
Dann hab ich den Treiber (version 185) neuinstalliert und da kam wieder der Fehler.
Meine Frage ist jetzt, wie ich den neusten NVIDIA Treiber auf dem 2.6.33 Kernel installieren soll.
Soll ich den folgenden Anweisungen folgen? : http://wiki.ubuntuusers.de/Grafikkarten/Nv...berinstallation

Wäre nett, wenn ihr mir das Schritt für Schritt erklärt, den ohne Treiber is meine GraKa extrem laut!

[wl59]

NVIDIA 2.1.17 laeuft bei mir problemlos mit X 1.8-dev und Kernel 2.6.34-rc1

Unten Ausgabe vom Protokoll von X , und Konfig-Datei , damit solltest du den Fehler finden koennen
(daß als willkuerlicher device-Name "VESA-Framebuffer" angegeben ist ist belanglos da ich nur zu faul war das umzubenennen; der Treiber ist nv , manchmal benutze ich statt nv auch fbdev oder vesa, funktioniert alles problemlos)


Fertige Pakete gibt es hier:
ftp://ftp.polytechnic.edu.na/pub/SYS

Installieren: entzippen und uebers System kopieren, dann aus /install die Datei doinst.sh nach / kopieren, cd / , und von / aus (!!!) sh doinst.sh ausfuehren, danach /install und doinst.sh loeschen. Mit CTRL-ALT-BACKSPACE (oder mit init 2 ; init 5) X neu starten



/var/log/Xorg.0.log :

[	70.367] 
This is a pre-release version of the X server from SYS.
It is not supported in any way.
Bugs may be filed in the bugzilla at [url="http://bugs.freedesktop.org/"]http://bugs.freedesktop.org/[/url].
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See [url="http://wiki.x.org/wiki/GitPage"]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
[	70.383] 
X.Org X Server 1.7.99.901 (1.8.0 RC 1)
Release Date: 2010-02-12
[	70.383] X Protocol Version 11, Revision 0
[	70.383] Build Operating System: SYS 0.24 SYS
[	70.383] Current Operating System: Linux werner 2.6.34-rc1 #1 SMP PREEMPT Mon Mar 8 21:39:47 GFT 2010 i686
[	70.383] Kernel command line: BOOT_IMAGE=2634rc1 ro root=801 4 root=/dev/sda1 devfs=nomount noapic nolapic acpi=ht rootwait percpu_alloc=page
[	70.383] Build Date: 05 March 2010  09:31:11PM
[	70.383]  
[	70.393] Current version of pixman: 0.17.10
[	70.393] 	Before reporting problems, check [url="ftp://guyane.dyn-o-saur.com/sys"]ftp://guyane.dyn-o-saur.com/sys[/url]
	to make sure that you have the latest version.
[	70.393] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (?) unknown.
[	70.393] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 14 17:42:01 2010
[	70.463] (==) Using config file: "/etc/X11/xorg.conf"
[	70.470] Parse error on line 87 of section Files in file /etc/X11/xorg.conf
	Ignoring obsolete keyword "RgbPath".
[	70.471] (==) ServerLayout "Simple Layout"
[	70.471] (**) |-->Screen "Screen 1" (0)
[	70.471] (**) |   |-->Monitor "My Monitor"
[	70.471] (**) |   |-->Device "VESA Framebuffer"
[	70.471] (**) |-->Input Device "Mouse1"
[	70.471] (**) |-->Input Device "Keyboard1"
[	70.471] (==) Not automatically adding devices
[	70.471] (==) Not automatically enabling devices
[	70.482] (WW) The directory "/usr/share/fonts/CID/" does not exist.
[	70.482] 	Entry deleted from font path.
[	70.549] (**) FontPath set to:
	/usr/share/fonts/local/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/Speedo/,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/cyrillic/,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled
[	70.549] (==) ModulePath set to "/usr/lib/xorg/modules"
[	70.549] (II) Loader magic: 0x81e8100
[	70.549] (II) Module ABI versions:
[	70.549] 	X.Org ANSI C Emulation: 0.4
[	70.549] 	X.Org Video Driver: 7.0
[	70.549] 	X.Org XInput driver : 9.0
[	70.549] 	X.Org Server Extension : 3.0
[	70.576] (--) PCI:*(0:0:13:0) 10de:03d0:1043:8234 nVidia Corporation GeForce 6100 nForce 430 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x?/131072
[	70.576] (WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
[	70.576] (II) Open APM successful
[	70.576] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[	70.576] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[	70.576] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[	70.576] (II) "record" will be loaded by default.
[	70.576] (II) "dri" will be loaded by default.
[	70.576] (II) "dri2" will be loaded by default.
[	70.576] (II) LoadModule: "dbe"
[	70.744] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[	70.754] (II) Module dbe: vendor="X.Org Foundation"
[	70.754] 	compiled for 1.7.99.901, module version = 1.0.0
[	70.754] 	Module class: X.Org Server Extension
[	70.754] 	ABI class: X.Org Server Extension, version 3.0
[	70.754] (II) Loading extension DOUBLE-BUFFER
[	70.754] (II) LoadModule: "extmod"
[	70.755] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[	70.846] (II) Module extmod: vendor="X.Org Foundation"
[	70.846] 	compiled for 1.7.99.901, module version = 1.0.0
[	70.846] 	Module class: X.Org Server Extension
[	70.846] 	ABI class: X.Org Server Extension, version 3.0
[	70.846] (II) Loading extension MIT-SCREEN-SAVER
[	70.846] (II) Loading extension XFree86-VidModeExtension
[	70.846] (II) Loading extension DPMS
[	70.846] (II) Loading extension XVideo
[	70.846] (II) Loading extension XVideo-MotionCompensation
[	70.846] (II) Loading extension X-Resource
[	70.846] (II) LoadModule: "glx"
[	70.861] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[	70.867] (II) Module glx: vendor="X.Org Foundation"
[	70.867] 	compiled for 1.7.99.901, module version = 1.0.0
[	70.867] 	ABI class: X.Org Server Extension, version 3.0
[	70.868] (==) AIGLX enabled
[	70.868] (II) Loading extension GLX
[	70.868] (II) LoadModule: "record"
[	70.869] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[	70.870] (II) Module record: vendor="X.Org Foundation"
[	70.870] 	compiled for 1.7.99.901, module version = 1.13.0
[	70.870] 	Module class: X.Org Server Extension
[	70.870] 	ABI class: X.Org Server Extension, version 3.0
[	70.870] (II) Loading extension RECORD
[	70.870] (II) LoadModule: "dri"
[	70.877] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[	70.892] (II) Module dri: vendor="X.Org Foundation"
[	70.892] 	compiled for 1.7.99.901, module version = 1.0.0
[	70.892] 	ABI class: X.Org Server Extension, version 3.0
[	70.892] (II) Loading extension XFree86-DRI
[	70.892] (II) LoadModule: "dri2"
[	70.893] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[	70.893] (II) Module dri2: vendor="X.Org Foundation"
[	70.893] 	compiled for 1.7.99.901, module version = 1.2.0
[	70.893] 	ABI class: X.Org Server Extension, version 3.0
[	70.893] (II) Loading extension DRI2
[	70.893] (II) LoadModule: "nv"
[	70.986] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[	71.004] (II) Module nv: vendor="X.Org Foundation"
[	71.004] 	compiled for 1.7.99.901, module version = 2.1.17
[	71.004] 	Module class: X.Org Video Driver
[	71.004] 	ABI class: X.Org Video Driver, version 7.0
[	71.013] (II) LoadModule: "mouse"
[	71.014] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[	71.023] (II) Module mouse: vendor="X.Org Foundation"
[	71.023] 	compiled for 1.7.99.901, module version = 1.5.0
[	71.023] 	Module class: X.Org XInput Driver
[	71.023] 	ABI class: X.Org XInput driver, version 9.0
[	71.023] (II) LoadModule: "kbd"
[	71.024] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[	71.028] (II) Module kbd: vendor="X.Org Foundation"
[	71.028] 	compiled for 1.7.99.901, module version = 1.4.0
[	71.028] 	Module class: X.Org XInput Driver
[	71.028] 	ABI class: X.Org XInput driver, version 9.0
[	71.028] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
	GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
	Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
	GeForce 6200 TurboCache(tm), GeForce 6200SE TurboCache(tm),
	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
	GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
	GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
	Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
	GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
	GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
	GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
	GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
	GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
	GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
	GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
	Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
	GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
	Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
	GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
	GeForce 6100 nForce 420, GeForce 8800 GTX, GeForce 8800 GTS,
	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
	GeForce GTX 295, GeForce GTX 280, GeForce GTX 260, GeForce GTX 285,
	GeForce GTX 275, GeForce GTX 295, Quadro CX, Quadro FX 5800,
	Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
	GeForce 9800 GT, GeForce 8800 GT, GeForce 9800 GX2, GeForce 9800 GT,
	GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
	GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
	GeForce 8800M GTX, GeForce 8800 GS, GeForce 9600 GSO,
	GeForce 8800 GT, GeForce 9800 GTX, GeForce 9800 GTX+,
	GeForce 9800 GT, GeForce GTS 250, GeForce 9800M GTX,
	GeForce GTX 260M, Quadro FX 3700, Quadro FX 3600M, Quadro FX 2800M,
	Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
	GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
	GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
	GeForce 9800M GTS, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
	GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce GT 120,
	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
	GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce GT 130M,
	GeForce 9500 GT, Quadro FX 380, Quadro FX 580, Quadro FX 1700M,
	Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400 GS,
	GeForce 9300M GS, GeForce G100, GeForce 9200M GS, GeForce 9300M GS,
	Quadro NVS 150M, Quadro NVS 160M, GeForce G 105M, GeForce G 103M,
	Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro NVS 295,
	GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
	nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
	GeForce 9100M G, GeForce 8200M G, GeForce 9400, GeForce 9400M G,
	GeForce 9400M, GeForce 9300 / nForce 730i, GeForce G102M,
	GeForce G102M, GeForce 9400, ION, ION LE, GeForce GT 220,
	GeForce 210, GeForce GT 230M, GeForce GT 240M, GeForce G210,
	GeForce 205, GeForce 310, GeForce 210, GeForce 310, GeForce G210M,
	Quadro FX 380 LP, GeForce GT 240, GeForce GTS 260M, GeForce GTS 250M
[	71.033] (++) using VT number 7

[	71.036] (II) Primary Device is: PCI 00@00:0d:0
[	71.036] (--) NV: Found NVIDIA GeForce 6150SE at 00@00:0d:0
[	71.036] (II) Loading sub module "int10"
[	71.036] (II) LoadModule: "int10"
[	71.037] (II) Loading /usr/lib/xorg/modules/libint10.so
[	71.067] (II) Module int10: vendor="X.Org Foundation"
[	71.067] 	compiled for 1.7.99.901, module version = 1.0.0
[	71.067] 	ABI class: X.Org Video Driver, version 7.0
[	71.067] (II) NV(0): Initializing int10
[	71.069] (II) NV(0): Primary V_BIOS segment is: 0xc000
[	71.069] (--) NV(0): Chipset: "GeForce 6150SE"
[	71.069] (**) NV(0): Depth 24, (--) framebuffer bpp 32
[	71.069] (==) NV(0): RGB weight 888
[	71.069] (==) NV(0): Default visual is TrueColor
[	71.069] (II) Loading sub module "vgahw"
[	71.069] (II) LoadModule: "vgahw"
[	71.070] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[	71.070] (II) Module vgahw: vendor="X.Org Foundation"
[	71.070] 	compiled for 1.7.99.901, module version = 0.1.0
[	71.071] 	ABI class: X.Org Video Driver, version 7.0
[	71.071] (==) NV(0): Using HW cursor
[	71.071] (--) NV(0): Linear framebuffer at 0xE0000000
[	71.071] (--) NV(0): MMIO registers at 0xFB000000
[	71.072] (II) Loading sub module "i2c"
[	71.072] (II) LoadModule: "i2c"
[	71.072] (II) Module "i2c" already built-in
[	71.072] (II) Loading sub module "ddc"
[	71.072] (II) LoadModule: "ddc"
[	71.072] (II) Module "ddc" already built-in
[	71.073] (II) NV(0): I2C bus "DDC" initialized.
[	71.073] (II) NV(0): Probing for analog device on output A...
[	71.075] (--) NV(0):   ...found one
[	71.075] (II) NV(0): Probing for analog device on output B...
[	71.077] (--) NV(0):   ...can't find one
[	71.077] (II) NV(0): Probing for EDID on I2C bus A...
[	71.077] (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
[	71.082] (II) NV(0):   ... none found
[	71.082] (II) NV(0): Probing for EDID on I2C bus B...
[	71.084] (II) NV(0): I2C device "DDC:DDC control interface" registered at address 0x6E.
[	71.140] (--) NV(0): DDC detected a CRT:
[	71.140] (II) NV(0): Manufacturer: PKB  Model: 5062  Serial#: 16843009
[	71.140] (II) NV(0): Year: 2008  Week: 43
[	71.140] (II) NV(0): EDID Version: 1.3
[	71.140] (II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[	71.140] (II) NV(0): Sync:  Separate
[	71.140] (II) NV(0): Max Image Size [cm]: horiz.: 47  vert.: 30
[	71.140] (II) NV(0): Gamma: 2.20
[	71.140] (II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[	71.140] (II) NV(0): First detailed timing is preferred mode
[	71.140] (II) NV(0): redX: 0.644 redY: 0.333   greenX: 0.286 greenY: 0.603
[	71.140] (II) NV(0): blueX: 0.152 blueY: 0.079   whiteX: 0.313 whiteY: 0.329
[	71.140] (II) NV(0): Supported established timings:
[	71.140] (II) NV(0): 720x400@70Hz
[	71.140] (II) NV(0): 640x480@60Hz
[	71.140] (II) NV(0): 640x480@75Hz
[	71.140] (II) NV(0): 800x600@60Hz
[	71.140] (II) NV(0): 800x600@75Hz
[	71.140] (II) NV(0): 1024x768@60Hz
[	71.140] (II) NV(0): 1024x768@75Hz
[	71.140] (II) NV(0): 1280x1024@75Hz
[	71.140] (II) NV(0): Manufacturer's mask: 0
[	71.140] (II) NV(0): Supported standard timings:
[	71.140] (II) NV(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[	71.140] (II) NV(0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[	71.140] (II) NV(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[	71.140] (II) NV(0): #3: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[	71.140] (II) NV(0): Supported detailed timing:
[	71.140] (II) NV(0): clock: 146.4 MHz   Image Size:  474 x 296 mm
[	71.141] (II) NV(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
[	71.141] (II) NV(0): v_active: 1050  v_sync: 1056  v_sync_end 1086 v_blanking: 1089 v_border: 0
[	71.141] (II) NV(0): Monitor name: PKB MAE220W
[	71.141] (II) NV(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 150 MHz
[	71.141] (II) NV(0): Serial No: 114687793183
[	71.141] (II) NV(0): EDID (in hex):
[	71.141] (II) NV(0): 	00ffffffffffff004162625001010101
[	71.141] (II) NV(0): 	2b120103082f1e78ead515a455499a27
[	71.141] (II) NV(0): 	145054a54b008180b3009500950f0101
[	71.141] (II) NV(0): 	0101010101012d399030621a274068b0
[	71.141] (II) NV(0): 	6e01da281100001e000000fc00504b42
[	71.141] (II) NV(0): 	204d4145323230570a20000000fd0038
[	71.141] (II) NV(0): 	4c1f500f000a202020202020000000ff
[	71.141] (II) NV(0): 	003131343638373739333138330a003d
[	71.141] (--) NV(0): CRTC 0 appears to have a CRT attached
[	71.141] (II) NV(0): Using CRT on CRTC 0
[	71.141] (II) NV(0): EDID vendor "PKB", prod id 20578
[	71.141] (II) NV(0): Using hsync ranges from config file
[	71.141] (II) NV(0): Using vrefresh ranges from config file
[	71.141] (II) NV(0): Printing DDC gathered Modelines:
[	71.141] (II) NV(0): Modeline "1680x1050"x0.0  146.37  1680 1784 1960 2240  1050 1056 1086 1089 +hsync +vsync (65.3 kHz)
[	71.141] (II) NV(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[	71.141] (II) NV(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[	71.141] (II) NV(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[	71.141] (II) NV(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[	71.141] (II) NV(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[	71.141] (II) NV(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[	71.141] (II) NV(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[	71.141] (II) NV(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[	71.141] (II) NV(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[	71.141] (II) NV(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[	71.141] (II) NV(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[	71.141] (II) NV(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
[	71.141] (--) NV(0): VideoRAM: 262144 kBytes
[	71.141] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
[	71.141] (II) NV(0): My Monitor: Using hsync range of 31.50-50.00 kHz
[	71.141] (II) NV(0): My Monitor: Using vrefresh range of 40.00-90.00 Hz
[	71.141] (II) NV(0): My Monitor: Using maximum pixel clock of 150.00 MHz
[	71.141] (II) NV(0): Clock range:  12.00 to 400.00 MHz
[	71.141] (II) NV(0): Not using default mode "800x600" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "400x300" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "512x384" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "512x384" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "512x384" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "1152x864" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "576x432" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "1280x960" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "640x480" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "1280x960" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "640x480" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "1280x1024" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "640x512" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "1280x1024" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "640x512" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "1280x1024" (hsync out of range)
[	71.141] (II) NV(0): Not using default mode "640x512" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "800x600" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "800x600" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "800x600" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "800x600" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "800x600" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1792x1344" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "896x672" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1792x1344" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "896x672" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1856x1392" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "928x696" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1856x1392" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "928x696" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1920x1440" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "960x720" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1920x1440" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "960x720" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1400x1050" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "700x525" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1400x1050" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "700x525" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1920x1440" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "960x720" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "2048x1536" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "2048x1536" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "2048x1536" (hsync out of range)
[	71.142] (II) NV(0): Not using default mode "1024x768" (hsync out of range)
[	71.142] (II) NV(0): Not using driver mode "1680x1050" (hsync out of range)
[	71.142] (II) NV(0): Not using driver mode "1280x1024" (hsync out of range)
[	71.142] (II) NV(0): Not using driver mode "1024x768" (hsync out of range)
[	71.142] (II) NV(0): Not using driver mode "1280x1024" (hsync out of range)
[	71.142] (II) NV(0): Not using driver mode "1680x1050" (hsync out of range)
[	71.142] (II) NV(0): Not using driver mode "1440x900" (hsync out of range)
[	71.142] (II) NV(0): Not using driver mode "1440x900" (hsync out of range)
[	71.142] (--) NV(0): Virtual size is 1024x768 (pitch 1024)
[	71.142] (**) NV(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[	71.142] (II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[	71.142] (**) NV(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[	71.142] (II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[	71.142] (**) NV(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[	71.142] (II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[	71.142] (**) NV(0):  Default mode "1024x768i": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
[	71.142] (II) NV(0): Modeline "1024x768i"x86.9   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync (35.5 kHz)
[	71.142] (**) NV(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[	71.142] (II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[	71.142] (**) NV(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[	71.142] (II) NV(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[	71.142] (**) NV(0):  Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[	71.142] (II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[	71.142] (**) NV(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[	71.142] (II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[	71.142] (**) NV(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[	71.142] (II) NV(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[	71.143] (**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[	71.143] (II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[	71.143] (**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[	71.143] (II) NV(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[	71.143] (**) NV(0):  Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[	71.143] (II) NV(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[	71.143] (**) NV(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
[	71.143] (II) NV(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
[	71.143] (**) NV(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[	71.143] (II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[	71.143] (**) NV(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[	71.143] (II) NV(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[	71.143] (**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[	71.143] (II) NV(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[	71.143] (**) NV(0):  Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
[	71.143] (II) NV(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[	71.143] (**) NV(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
[	71.143] (II) NV(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
[	71.143] (**) NV(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
[	71.143] (II) NV(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
[	71.143] (**) NV(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
[	71.143] (II) NV(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
[	71.143] (**) NV(0):  Default mode "512x384i": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
[	71.143] (II) NV(0): Modeline "512x384i"x86.6   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync (35.5 kHz)
[	71.143] (**) NV(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[	71.143] (II) NV(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
[	71.143] (**) NV(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
[	71.143] (II) NV(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
[	71.143] (**) NV(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
[	71.143] (II) NV(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
[	71.143] (**) NV(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
[	71.143] (II) NV(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
[	71.143] (**) NV(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[	71.143] (II) NV(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
[	71.143] (**) NV(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[	71.143] (II) NV(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
[	71.143] (**) NV(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
[	71.143] (II) NV(0): Modeline "320x240"x85.2   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync (43.3 kHz)
[	71.143] (**) NV(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
[	71.143] (II) NV(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz)
[	71.143] (**) NV(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
[	71.143] (II) NV(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz)
[	71.143] (**) NV(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[	71.143] (II) NV(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
[	71.143] (**) NV(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
[	71.143] (II) NV(0): Modeline "360x200"x85.0   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync (37.9 kHz)
[	71.143] (**) NV(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
[	71.143] (II) NV(0): Modeline "320x200"x85.3   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync (37.9 kHz)
[	71.143] (**) NV(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
[	71.143] (II) NV(0): Modeline "320x175"x85.3   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync (37.9 kHz)
[	71.143] (**) NV(0): Display dimensions: (470, 300) mm
[	71.143] (**) NV(0): DPI set to (55, 65)
[	71.143] (II) Loading sub module "fb"
[	71.143] (II) LoadModule: "fb"
[	71.144] (II) Loading /usr/lib/xorg/modules/libfb.so
[	71.149] (II) Module fb: vendor="X.Org Foundation"
[	71.149] 	compiled for 1.7.99.901, module version = 1.0.0
[	71.149] 	ABI class: X.Org ANSI C Emulation, version 0.4
[	71.149] (II) Loading sub module "xaa"
[	71.149] (II) LoadModule: "xaa"
[	71.149] (II) Loading /usr/lib/xorg/modules/libxaa.so
[	71.159] (II) Module xaa: vendor="X.Org Foundation"
[	71.159] 	compiled for 1.7.99.901, module version = 1.2.1
[	71.159] 	ABI class: X.Org Video Driver, version 7.0
[	71.159] (II) Loading sub module "ramdac"
[	71.159] (II) LoadModule: "ramdac"
[	71.159] (II) Module "ramdac" already built-in
[	71.159] (--) Depth 24 pixmap format is 32 bpp
[	71.202] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
[	71.203] 	Screen to screen bit blits
[	71.203] 	Solid filled rectangles
[	71.203] 	8x8 mono pattern filled rectangles
[	71.203] 	Indirect CPU to Screen color expansion
[	71.203] 	Solid Lines
[	71.203] 	Scanline Image Writes
[	71.203] 	Setting up tile and stipple cache:
[	71.203] 		32 128x128 slots
[	71.203] 		32 256x256 slots
[	71.203] 		16 512x512 slots
[	71.203] (==) NV(0): Backing store disabled
[	71.203] (==) NV(0): Silken mouse enabled
[	71.204] (==) NV(0): DPMS enabled
[	71.204] (==) RandR enabled
[	71.204] (II) Initializing built-in extension Generic Event Extension
[	71.204] (II) Initializing built-in extension SHAPE
[	71.204] (II) Initializing built-in extension MIT-SHM
[	71.204] (II) Initializing built-in extension XInputExtension
[	71.204] (II) Initializing built-in extension XTEST
[	71.204] (II) Initializing built-in extension BIG-REQUESTS
[	71.204] (II) Initializing built-in extension SYNC
[	71.204] (II) Initializing built-in extension XKEYBOARD
[	71.204] (II) Initializing built-in extension XC-MISC
[	71.204] (II) Initializing built-in extension SECURITY
[	71.204] (II) Initializing built-in extension XINERAMA
[	71.204] (II) Initializing built-in extension XFIXES
[	71.204] (II) Initializing built-in extension XFree86-Bigfont
[	71.204] (II) Initializing built-in extension RENDER
[	71.204] (II) Initializing built-in extension RANDR
[	71.204] (II) Initializing built-in extension COMPOSITE
[	71.204] (II) Initializing built-in extension DAMAGE
[	71.214] (II) AIGLX: Screen 0 is not DRI2 capable
[	71.214] (II) AIGLX: Screen 0 is not DRI capable
[	71.267] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[	71.268] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[	71.957] (**) Option "Protocol" "IMPS/2"
[	71.957] (**) Mouse1: Device: "/dev/mouse"
[	71.957] (**) Mouse1: Protocol: "IMPS/2"
[	71.957] (**) Option "CorePointer"
[	71.957] (**) Mouse1: always reports core events
[	71.957] (**) Option "Device" "/dev/mouse"
[	71.957] (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
[	71.957] (**) Mouse1: ZAxisMapping: buttons 4 and 5
[	71.957] (**) Mouse1: Buttons: 9
[	71.957] (**) Mouse1: Sensitivity: 1
[	71.957] (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
[	71.957] (**) Mouse1: (accel) keeping acceleration scheme 1
[	71.957] (**) Mouse1: (accel) acceleration profile 0
[	71.957] (**) Mouse1: (accel) acceleration factor: 2.000
[	71.957] (**) Mouse1: (accel) acceleration threshold: 4
[	72.188] (II) Mouse1: ps2EnableDataReporting: succeeded
[	72.188] (**) Option "CoreKeyboard"
[	72.188] (**) Keyboard1: always reports core events
[	72.189] (**) Option "Protocol" "standard"
[	72.189] (**) Keyboard1: Protocol: standard
[	72.189] (**) Option "XkbRules" "base"
[	72.189] (**) Keyboard1: XkbRules: "base"
[	72.189] (**) Option "XkbModel" "pc105"
[	72.189] (**) Keyboard1: XkbModel: "pc105"
[	72.189] (**) Option "XkbLayout" "us"
[	72.189] (**) Keyboard1: XkbLayout: "us"
[	72.189] (**) Option "CustomKeycodes" "off"
[	72.189] (**) Keyboard1: CustomKeycodes disabled
[	72.189] (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
[   192.871] (II) Open APM successful
[   193.108] (II) Mouse1: ps2EnableDataReporting: succeeded
[   279.432] (II) Open APM successful
[   279.669] (II) Mouse1: ps2EnableDataReporting: succeeded
[  5519.235] (II) Open APM successful
[  5519.478] (II) Mouse1: ps2EnableDataReporting: succeeded
[  5634.499] (II) Open APM successful
[  5634.741] (II) Mouse1: ps2EnableDataReporting: succeeded
[  5747.230] (II) Open APM successful
[  5747.473] (II) Mouse1: ps2EnableDataReporting: succeeded
[  6006.620] (II) Open APM successful
[  6006.864] (II) Mouse1: ps2EnableDataReporting: succeeded
[  7158.978] (II) Open APM successful
[  7159.222] (II) Mouse1: ps2EnableDataReporting: succeeded
[  7779.036] (II) Open APM successful
[  7779.280] (II) Mouse1: ps2EnableDataReporting: succeeded
[  8038.417] (II) Open APM successful
[  8038.659] (II) Mouse1: ps2EnableDataReporting: succeeded
[  8268.425] (II) Open APM successful
[  8268.686] (II) Mouse1: ps2EnableDataReporting: succeeded
[  8706.173] (II) Open APM successful
[  8706.423] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 10005.230] (II) Open APM successful
[ 10005.478] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 29445.365] (II) Open APM successful
[ 29445.604] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 32053.904] (II) Open APM successful
[ 32054.149] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 32202.973] (II) Open APM successful
[ 32203.217] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 36222.337] (II) Open APM successful
[ 36222.579] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 36515.369] (II) Open APM successful
[ 36515.611] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 38454.810] (II) Open APM successful
[ 38455.051] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 38578.656] (II) Open APM successful
[ 38578.896] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 39336.937] (II) Open APM successful
[ 39337.186] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 39852.398] (II) Open APM successful
[ 39852.640] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 39940.581] (II) Open APM successful
[ 39940.821] (II) Mouse1: ps2EnableDataReporting: succeeded
[ 40308.039] (II) Open APM successful
[ 40308.279] (II) Mouse1: ps2EnableDataReporting: succeeded

/etc/X11/xorg.conf :

# **************************************************
********************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **************************************************
********************
#
Section "Module"

# This loads the DBE extension module.

	Load		"dbe"	  # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
	SubSection  "extmod"
	  Option	"omit xfree86-dga"   # don't initialise the DGA extension
	EndSubSection

# This loads the font modules
	Load		"type1"
	Load		"freetype"
	#Load		"speedo"

# This loads the GLX module
	Load	   "glx"

EndSection

# **************************************************
********************
# Files section.  This allows default font and rgb paths to be set
# **************************************************
********************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

	RgbPath	"/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

	FontPath   "/usr/share/fonts/local/"
	FontPath   "/usr/share/fonts/misc/"
	FontPath   "/usr/share/fonts/OTF/"
	FontPath   "/usr/share/fonts/TTF/"
	FontPath   "/usr/share/fonts/Type1/"
	FontPath   "/usr/share/fonts/CID/"
	FontPath   "/usr/share/fonts/Speedo/"
	FontPath   "/usr/share/fonts/75dpi/:unscaled"
	FontPath   "/usr/share/fonts/100dpi/:unscaled"
	FontPath   "/usr/share/fonts/75dpi/"
	FontPath   "/usr/share/fonts/100dpi/"
	FontPath   "/usr/share/fonts/cyrillic/"

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.

#	ModulePath "/usr/lib/xorg/modules"

EndSection

# **************************************************
********************
# Server flags section.
# **************************************************
********************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#	Option	 "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#	Option	 "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#	Option	 "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#	Option	 "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#	Option	 "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#	Option	 "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#	Option	 "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#	Option	 "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

#	Option	  "blank time"	"10"	# 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

#	Option	  "standby time"  "20"
#	Option	  "suspend time"  "30"
#	Option	  "off time"	  "60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option   "EstimateSizesAggresively" "0"

EndSection

# **************************************************
********************
# Input devices
# **************************************************
********************

# **************************************************
********************
# Core keyboard's InputDevice section
# **************************************************
********************

Section "InputDevice"

	Identifier	"Keyboard1"
	Driver	"kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#	Option	 "Protocol"	  "Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

#	Option	 "AutoRepeat"	"500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#	Option	 "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#	Option	 "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#	Option	 "XkbModel"	  "pc102"
#	Option	 "XkbModel"	  "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#	Option	 "XkbModel"	  "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#	Option	 "XkbModel"	  "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#	Option	 "XkbLayout"	 "de"
#
# or:
#
#	Option	 "XkbLayout"	 "de"
#	Option	 "XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#	Option	 "XkbOptions"	"ctrl:swapcaps"


# These are the default XKB settings for X.Org
#
#	Option	 "XkbRules"	  "xorg"
#	Option	 "XkbModel"	  "pc105"
#	Option	 "XkbLayout"	 "us"
#	Option	 "XkbVariant"	""
#	Option	 "XkbOptions"	""

EndSection


# **************************************************
********************
# Core Pointer's InputDevice section
# **************************************************
********************

Section "InputDevice"

# Identifier and driver

	Identifier	"Mouse1"
	Driver	"mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

#	Option	 "Protocol"	  "Auto"

# The available mouse protocols types that you can set below are:
#	Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#	Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#	MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#	ThinkingMouse ThinkingMousePS/2 Xqueue
	Option "Protocol"	"IMPS/2"

# The mouse device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

	Option "Device"	  "/dev/mouse"
#   Option "Device"	  "/dev/psaux"
#   Option "Device"	  "/dev/ttyS0"
#   Option "Device"	  "/dev/ttyS1"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#	Option "Protocol"	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#	Option "BaudRate"		"9600"
#	Option "SampleRate"	"150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#	Option "Emulate3Buttons"
#	Option "Emulate3Timeout"	"50"

# ChordMiddle is an option for some 3-button Logitech mice

#	Option "ChordMiddle"

EndSection

# Some examples of extended input devices

# Section "InputDevice"
#	Identifier "spaceball"
#	Driver	 "magellan"
#	Option	 "Device"		"/dev/cua0"
# EndSection
#
# Section "InputDevice"
#	Identifier "spaceball2"
#	Driver	 "spaceorb"
#	Option	 "Device"		"/dev/cua0"
# EndSection
#
# Section "InputDevice"
#	Identifier "touchscreen0"
#	Driver	 "microtouch"
#	Option	 "Device"		"/dev/ttyS0"
#	Option	 "MinX"		  "1412"
#	Option	 "MaxX"		  "15184"
#	Option	 "MinY"		  "15372"
#	Option	 "MaxY"		  "1230"
#	Option	 "ScreenNumber"  "0"
#	Option	 "ReportingMode" "Scaled"
#	Option	 "ButtonNumber"  "1"
#	Option	 "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#	Identifier "touchscreen1"
#	Driver	 "elo2300"
#	Option	 "Device"		"/dev/ttyS0"
#	Option	 "MinX"		  "231"
#	Option	 "MaxX"		  "3868"
#	Option	 "MinY"		  "3858"
#	Option	 "MaxY"		  "272"
#	Option	 "ScreenNumber"  "0"
#	Option	 "ReportingMode" "Scaled"
#	Option	 "ButtonThreshold"	   "17"
#	Option	 "ButtonNumber"  "1"
#	Option	 "SendCoreEvents"
# EndSection

# **************************************************
********************
# Monitor section
# **************************************************
********************

# Any number of monitor sections may be present

Section "Monitor"

	Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

	HorizSync   31.5 - 50.0

#	HorizSync	30-64		 # multisync
#	HorizSync	31.5, 35.2	# multiple fixed sync frequencies
#	HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

	VertRefresh 40-90

EndSection


# **************************************************
********************
# Graphics device section
# **************************************************
********************

# Any number of graphics device sections may be present

Section "Device"
	Identifier  "VESA Framebuffer"
	Driver	  "nv"
	#VideoRam	4096
	# Insert Clocks lines here if appropriate
EndSection

# **************************************************
********************
# Screen sections
# **************************************************
********************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
	Identifier  "Screen 1"
	Device	  "VESA Framebuffer"
	Monitor	 "My Monitor"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.

#   DefaultDepth 8
#   DefaultDepth 16
   DefaultDepth 24
#   DefaultDepth 32

# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)

	Subsection "Display"
		Depth	   8
		Modes "1024x768" "800x600" "640x480"
	EndSubsection
	Subsection "Display"
		Depth	   16
		Modes "1024x768" "800x600" "640x480"
	EndSubsection
	Subsection "Display"
		Depth	   24
		Modes "1024x768" "800x600" "640x480"
	EndSubsection
	Subsection "Display"
		Depth	   32
		Modes "1024x768" "800x600" "640x480"
	EndSubsection

EndSection

# **************************************************
********************
# ServerLayout sections.
# **************************************************
********************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
	Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

	Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

	InputDevice "Mouse1" "CorePointer"
	InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Angehängte Miniaturbilder

• 

[xNeo92x]

1. Hab ich schon gesagt, dass ich ein totaler Linux-Noob bin?
2. Ich weiß nicht ob's relevant ist, aber ich hab ein 64-Bit Linux.
3. Wär es i-wie anders, wenn ich wieder das original Ubuntu installiere? (auch 64bit)

Dieser Beitrag wurde von xNeo92x bearbeitet: 15. März 2010 - 20:25

[Stefan_der_held]

Zitat (xNeo92x: 14.03.2010, 14:28)

Wäre nett, wenn ihr mir das Schritt für Schritt erklärt, den ohne Treiber is meine GraKa extrem laut!

Dann sei doch einfach lauter

Na scherz beiseite... Ich nehme fast an - kenne grad nicht die aktuellen Details - dass du das selbe Porblem hast wie ich damals mit SuSE 10.0

Der Strich wurde mir durch den zu neuen (beta) XServer durch die Rechnung gemacht.

Bleiben dir 2 Möglichkeiten:

Warten auf nVidia und mit deinem XServer funktionierenden Treiber
umrüsten auf alternativ OS wie Ubuntu.

Gruß,

Stefan

[xNeo92x]

Ich weiß nicht ob du mich richtig verstanden hast, aber Linux Mint ist eigentlich Ubuntu, nur mit ner anderen Oberfläche und schon vorinstallierten Codecs. Das Problem mit dem Treiber ist ja erst eingetretten, als ich den neuen Kernel installiert habe. Davor war alles wunderbar.
Fragt sich nur ob das gleiche Problem mit dem original Ubuntu auftritt.

[wl59]

Du wolltest das Schritt-fuer-Schritt erklaert haben, habe ich oben genau gemacht wie man das installiert, aber jetzt ist es auch nicht recht ...

Bleib halt beim alten Kernel, also lass die Distro so wie sie nach der Installation ist

[Witi]

Zitat

Nur beim starten kam ein Fehler, dass der NVIDIA Treiber nicht richtig funktioniert.

Kannst du die konkrete Fehlermeldung posten?

[xNeo92x]

Könnt ich machen, allerdings nur am Wochenende, weil ich da mehr Zeit habe.

[bb83]

Zitat

Soll ich den folgenden Anweisungen folgen? : http://wiki.ubuntuus...berinstallation

Wäre nett, wenn ihr mir das Schritt für Schritt erklärt, den ohne Treiber is meine GraKa extrem laut!

Da stehen doch alle Infos drin ?

[xNeo92x]

So, mein Problem hat sich eigentlich schon fast erledigt. Ich habe das original Ubuntu 9.10 installiert, dann den 2.6.33er Kernel draufgehauen, dann wurde mir ein neuer NVIDIA Treiber vorgeschlagen (Version 195) und denn hab ich installiert. Zurzeit funktioniert alles, auch die GraKa läuft normal.
Das einzige Problem was ich nun habe ist, dass kein Sound mehr da ist. Die Hardware wird anscheinend nicht erkannt.

[Witi]

Welche Soundkarte hast du denn?

Beliebter Anfängerfehler ist übrigens, dass die Lautstärke runtergedreht ist.

[xNeo92x]

Zitat (Witi: 18.03.2010, 15:25)

Welche Soundkarte hast du denn?

Beliebter Anfängerfehler ist übrigens, dass die Lautstärke runtergedreht ist.

xD nein so doof bin ich jetzt auch nicht. Jedenfalls hab ich jetzt gemerkt, dass die Soundkarte mal erkannt wird und mal nicht. Zurzeit kann ich noch Musik hören; ob das nach dem nächsten Neustart auch so sein wird weiß ich nicht.
Is nur Onboard-Sound. Motherboardmodell: ASUS M4N72-E

[Witi]

Tja...du wirst dich wundern, was ich schon alles erlebt habe.

Soundchip ist der VIA VT1708S. Habe ich noch nie etwas von gehört.

Hmm...dass sie mal erkannt wird und mal nicht, kann ich mir ehrlich gesagt nicht vorstellen. Falls sie mal wieder zicken sollte, kannst du mal die Ausgabe von `dmesg` posten.

[xNeo92x]

Ok, werd ich machen. Und danke für die Info

[xNeo92x]

So, dmsg gibt folgendes aus:

CODE

[ 0.798969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.799064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
[ 0.799122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 0.799176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.813743] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.813958] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.814169] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.814382] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
[ 0.814595] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.814805] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.815016] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.815226] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.815436] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.815647] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.815857] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.816068] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.816278] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[ 0.816489] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.816700] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.816912] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.817125] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11
[ 0.817335] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.817545] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.817755] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.817968] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
[ 0.818178] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.818388] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.818599] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.818810] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.819021] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.819233] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.819444] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.819655] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.819865] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.820088] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.820309] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.820519] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.820729] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.820940] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.821150] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.821364] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
[ 0.821578] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.821792] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
[ 0.822006] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.822216] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.822429] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.822643] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[ 0.822857] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.823102] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.823316] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[ 0.823529] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.823606] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=
none
[ 0.823608] vgaarb: loaded
[ 0.823667] SCSI subsystem initialized
[ 0.823693] libata version 3.00 loaded.
[ 0.823693] usbcore: registered new interface driver usbfs
[ 0.823693] usbcore: registered new interface driver hub
[ 0.823693] usbcore: registered new device driver usb
[ 0.823693] ACPI: WMI: Mapper loaded
[ 0.823693] PCI: Using ACPI for IRQ routing
[ 0.823693] PCI: pci_cache_line_size set to 64 bytes
[ 0.823693] Bluetooth: Core ver 2.15
[ 0.823693] NET: Registered protocol family 31
[ 0.823693] Bluetooth: HCI device and connection manager initialized
[ 0.823693] Bluetooth: HCI socket layer initialized
[ 0.823693] NetLabel: Initializing
[ 0.823693] NetLabel: domain hash size = 128
[ 0.823693] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.823693] NetLabel: unlabeled traffic allowed by default
[ 0.823693] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.823693] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.823693] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.850009] Switching to clocksource tsc
[ 0.850943] pnp: PnP ACPI init
[ 0.850950] ACPI: bus type pnp registered
[ 0.857635] pnp: PnP ACPI: found 14 devices
[ 0.857636] ACPI: ACPI bus type pnp unregistered
[ 0.857644] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.857646] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.857648] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.857649] system 00:05: [io 0x0580-0x05ff] has been reserved
[ 0.857651] system 00:05: [io 0x0800-0x087f] could not be reserved
[ 0.857653] system 00:05: [io 0x0880-0x08ff] has been reserved
[ 0.857655] system 00:05: [io 0x0d00-0x0d7f] has been reserved
[ 0.857656] system 00:05: [io 0x0d80-0x0dff] has been reserved
[ 0.857659] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.857661] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.857665] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.857667] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.857670] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.857672] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.857674] system 00:0a: [io 0x0a00-0x0a0f] has been reserved
[ 0.857675] system 00:0a: [io 0x0a10-0x0a1f] has been reserved
[ 0.857678] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.857682] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.857684] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.857686] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.857688] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.857690] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.862365] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.862367] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff]
[ 0.862370] pci 0000:00:08.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.862372] pci 0000:00:08.0: bridge window [mem pref disabled]
[ 0.862376] pci 0000:00:10.0: PCI bridge to [bus 02-02]
[ 0.862380] pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
[ 0.862389] pci 0000:00:10.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.862396] pci 0000:00:10.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.862408] pci 0000:00:13.0: PCI bridge to [bus 03-03]
[ 0.862409] pci 0000:00:13.0: bridge window [io disabled]
[ 0.862418] pci 0000:00:13.0: bridge window [mem disabled]
[ 0.862424] pci 0000:00:13.0: bridge window [mem pref disabled]
[ 0.862435] pci 0000:00:14.0: PCI bridge to [bus 04-04]
[ 0.862436] pci 0000:00:14.0: bridge window [io disabled]
[ 0.862445] pci 0000:00:14.0: bridge window [mem disabled]
[ 0.862451] pci 0000:00:14.0: bridge window [mem pref disabled]
[ 0.862466] pci 0000:00:08.0: setting latency timer to 64
[ 0.862778] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.862781] alloc irq_desc for 19 on node 0
[ 0.862782] alloc kstat_irqs on node 0
[ 0.862789] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 0.862796] pci 0000:00:10.0: setting latency timer to 64
[ 0.863105] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18
[ 0.863107] alloc irq_desc for 18 on node 0
[ 0.863108] alloc kstat_irqs on node 0
[ 0.863114] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18
[ 0.863121] pci 0000:00:13.0: setting latency timer to 64
[ 0.863422] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17
[ 0.863424] alloc irq_desc for 17 on node 0
[ 0.863425] alloc kstat_irqs on node 0
[ 0.863430] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17
[ 0.863438] pci 0000:00:14.0: setting latency timer to 64
[ 0.863442] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.863444] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.863445] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.863447] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.863449] pci_bus 0000:01: resource 3 [io 0x0000-0xffff]
[ 0.863450] pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff]
[ 0.863452] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.863453] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.863455] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.863471] NET: Registered protocol family 2
[ 0.863533] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.863911] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.865131] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.865456] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.865458] TCP reno registered
[ 0.865463] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.865478] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.865552] NET: Registered protocol family 1
[ 0.919934] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.920034] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.920139] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.920328] pci 0000:02:00.0: Boot video device
[ 0.920330] PCI: CLS 64 bytes, default 64
[ 0.920372] Trying to unpack rootfs image as initramfs...
[ 1.055467] Freeing initrd memory: 8235k freed
[ 1.058283] Scanning for low memory corruption every 60 seconds
[ 1.058384] audit: initializing netlink socket (disabled)
[ 1.058394] type=2000 audit(1269171819.053:1): initialized
[ 1.068602] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.069458] VFS: Disk quotas dquot_6.5.2
[ 1.069488] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.069852] fuse init (API version 7.13)
[ 1.069897] msgmni has been set to 4011
[ 1.070093] alg: No test for stdrng (krng)
[ 1.070104] io scheduler noop registered
[ 1.070105] io scheduler deadline registered
[ 1.070144] io scheduler cfq registered (default)
[ 1.070226] pcieport 0000:00:10.0: setting latency timer to 64
[ 1.070336] alloc irq_desc for 24 on node 0
[ 1.070338] alloc kstat_irqs on node 0
[ 1.070356] pcieport 0000:00:10.0: irq 24 for MSI/MSI-X
[ 1.070523] pcieport 0000:00:13.0: setting latency timer to 64
[ 1.070631] alloc irq_desc for 25 on node 0
[ 1.070632] alloc kstat_irqs on node 0
[ 1.070647] pcieport 0000:00:13.0: irq 25 for MSI/MSI-X
[ 1.070796] pcieport 0000:00:14.0: setting latency timer to 64
[ 1.070904] alloc irq_desc for 26 on node 0
[ 1.070905] alloc kstat_irqs on node 0
[ 1.070919] pcieport 0000:00:14.0: irq 26 for MSI/MSI-X
[ 1.071051] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.071065] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.071156] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.071159] ACPI: Power Button [PWRB]
[ 1.071190] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.071192] ACPI: Power Button [PWRF]
[ 1.077387] Linux agpgart interface v0.103
[ 1.077391] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.077477] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.077666] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.078208] brd: module loaded
[ 1.078458] loop: module loaded
[ 1.078502] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.078597] ahci 0000:00:09.0: version 3.0
[ 1.078915] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 1.078918] alloc irq_desc for 23 on node 0
[ 1.078920] alloc kstat_irqs on node 0
[ 1.078927] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.078947] alloc irq_desc for 27 on node 0
[ 1.078948] alloc kstat_irqs on node 0
[ 1.078953] ahci 0000:00:09.0: irq 27 for MSI/MSI-X
[ 1.079006] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 1.079009] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh
[ 1.079011] ahci 0000:00:09.0: setting latency timer to 64
[ 1.079333] scsi0 : ahci
[ 1.079392] scsi1 : ahci
[ 1.079430] scsi2 : ahci
[ 1.079465] scsi3 : ahci
[ 1.079501] scsi4 : ahci
[ 1.079535] scsi5 : ahci
[ 1.079627] ata1: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76100 irq 27
[ 1.079629] ata2: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76180 irq 27
[ 1.079630] ata3: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76200 irq 27
[ 1.079632] ata4: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76280 irq 27
[ 1.079634] ata5: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76300 irq 27
[ 1.079636] ata6: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76380 irq 27
[ 1.079803] pata_amd 0000:00:06.0: version 0.4.1
[ 1.079827] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.079882] scsi6 : pata_amd
[ 1.079913] scsi7 : pata_amd
[ 1.080834] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.080835] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.081274] Fixed MDIO Bus: probed
[ 1.081293] PPP generic driver version 2.4.2
[ 1.081351] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.081792] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 1.081795] alloc irq_desc for 22 on node 0
[ 1.081797] alloc kstat_irqs on node 0
[ 1.081804] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 1.081811] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.081813] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.081846] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.081864] ehci_hcd 0000:00:02.1: debug port 1
[ 1.081870] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.081885] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf7e7fc00
[ 1.100019] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.100088] hub 1-0:1.0: USB hub found
[ 1.100092] hub 1-0:1.0: 6 ports detected
[ 1.100472] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[ 1.100475] alloc irq_desc for 21 on node 0
[ 1.100476] alloc kstat_irqs on node 0
[ 1.100482] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
[ 1.100491] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.100493] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.100512] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 1.100528] ehci_hcd 0000:00:04.1: debug port 1
[ 1.100534] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 1.100549] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf7e7f800
[ 1.120023] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.120082] hub 2-0:1.0: USB hub found
[ 1.120085] hub 2-0:1.0: 6 ports detected
[ 1.120135] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.120477] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 1.120479] alloc irq_desc for 20 on node 0
[ 1.120480] alloc kstat_irqs on node 0
[ 1.120487] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 1.120495] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.120497] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.120516] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 1.120536] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf7e7e000
[ 1.182076] hub 3-0:1.0: USB hub found
[ 1.182080] hub 3-0:1.0: 6 ports detected
[ 1.182461] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[ 1.182464] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
[ 1.182472] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.182474] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.182498] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 1.182517] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf7e7d000
[ 1.230163] ata7.01: NODEV after polling detection
[ 1.242074] hub 4-0:1.0: USB hub found
[ 1.242079] hub 4-0:1.0: 6 ports detected
[ 1.242130] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.242189] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.242190] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.242321] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.242359] mice: PS/2 mouse device common for all mice
[ 1.242409] rtc_cmos 00:07: RTC can wake from S4
[ 1.242426] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.242476] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.242542] device-mapper: uevent: version 1.0.3
[ 1.242620] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: [email protected]
[ 1.242707] device-mapper: multipath: version 1.1.1 loaded
[ 1.242710] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.242890] cpuidle: using governor ladder
[ 1.242891] cpuidle: using governor menu
[ 1.243078] TCP cubic registered
[ 1.243164] NET: Registered protocol family 10
[ 1.243408] lo: Disabled Privacy Extensions
[ 1.243547] NET: Registered protocol family 17
[ 1.243557] Bluetooth: L2CAP ver 2.14
[ 1.243558] Bluetooth: L2CAP socket layer initialized
[ 1.243559] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.243560] Bluetooth: SCO socket layer initialized
[ 1.243604] Bluetooth: RFCOMM TTY layer initialized
[ 1.243605] Bluetooth: RFCOMM socket layer initialized
[ 1.243606] Bluetooth: RFCOMM ver 1.11
[ 1.243624] powernow-k8: Found 1 AMD Phenom™ II X4 945 Processor processors (4 cpu cores) (version 2.20.00)
[ 1.243655] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 1.243656] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 1.243657] powernow-k8: 2 : pstate 2 (1800 MHz)
[ 1.243658] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.243936] PM: Resume from disk failed.
[ 1.243943] registered taskstats version 1
[ 1.244228] Magic number: 2:409:732
[ 1.244342] rtc_cmos 00:07: setting system clock to 2010-03-21 11:43:39 UTC (1269171819)
[ 1.244344] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.244345] EDD information not available.
[ 1.250547] ata7.00: ATAPI: BENQ DVD DD DW1640, BSHB, max UDMA/33
[ 1.250562] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[ 1.256234] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.290512] ata7.00: configured for UDMA/33
[ 1.421272] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.431286] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.431303] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.431323] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.431327] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.611273] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.611284] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.612108] ata1.00: ATA-8: ST3250318AS, CC35, max UDMA/133
[ 1.612110] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.613135] ata1.00: configured for UDMA/133
[ 1.613199] ata3.00: ATA-7: SAMSUNG SP1614C, SW100-25, max UDMA7
[ 1.613202] ata3.00: 312581808 sectors, multi 16: LBA48
[ 1.613215] scsi 0:0:0:0: Direct-Access ATA ST3250318AS CC35 PQ: 0 ANSI: 5
[ 1.613303] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.613381] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.613408] sd 0:0:0:0: [sda] Write Protect is off
[ 1.613410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.613422] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.613495] sda:
[ 1.615183] ata3.00: configured for UDMA/133
[ 1.615243] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1614C SW10 PQ: 0 ANSI: 5
[ 1.615335] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.615339] sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.615384] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.615386] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.615398] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.615476] sdb:
[ 1.617584] scsi 6:0:0:0: CD-ROM BENQ DVD DD DW1640 BSHB PQ: 0 ANSI: 5
[ 1.621490] sdb1 sdb2 < sda1 sda2
[ 1.622456] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.625039] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.625042] Uniform CD-ROM driver Revision: 3.20
[ 1.625094] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1.625120] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 1.625164] ata8: port disabled. ignoring.
[ 1.647960] sdb5 >
[ 1.648124] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.648144] Freeing unused kernel memory: 736k freed
[ 1.648284] Write protecting the kernel read-only data: 10240k
[ 1.648381] Freeing unused kernel memory: 716k freed
[ 1.648651] Freeing unused kernel memory: 1608k freed
[ 1.721543] Floppy drive(s): fd0 is 1.44M
[ 1.735723] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.736221] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 1.736226] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 1.736229] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.743758] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16
[ 1.743763] alloc irq_desc for 16 on node 0
[ 1.743765] alloc kstat_irqs on node 0
[ 1.743774] ohci1394 0000:01:0a.0: PCI INT A -> Link[LNKD] -> GSI 16 (level, low) -> IRQ 16
[ 1.745116] FDC 0 is a post-1991 82077
[ 1.812062] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f7fff800-f7ffffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.821095] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:a8:5c:5c
[ 1.821098] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 2.000030] usb 3-3: new low speed USB device using ohci_hcd and address 2
[ 2.237101] usbcore: registered new interface driver hiddev
[ 2.244225] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input4
[ 2.244264] generic-usb 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:02.0-3/input0
[ 2.244279] usbcore: registered new interface driver usbhid
[ 2.244281] usbhid: USB HID core driver
[ 3.130140] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001e287b8]
[ 3.520803] PM: Starting manual resume from disk
[ 3.520806] PM: Resume from partition 8:21
[ 3.520807] PM: Checking hibernation image.
[ 3.520921] PM: Error -22 checking image file
[ 3.520922] PM: Resume from disk failed.
[ 3.588938] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[ 4.987081] Adding 6024332k swap on /dev/sdb5. Priority:-1 extents:1 across:6024332k
[ 5.332794] udev: starting version 147
[ 7.732162] nvidia: module license 'NVIDIA' taints kernel.
[ 7.732166] Disabling lock debugging due to kernel taint
[ 8.000757] EDAC MC: Ver: 2.1.0 Feb 25 2010
[ 8.010221] cfg80211: Calling CRDA to update world regulatory domain
[ 8.011201] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 8.011205] ACPI: I/O resource nForce2_smbus [0x700-0x73f] conflicts with ACPI region SM00 [0x700-0x73f]
[ 8.011208] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.011209] nForce2_smbus 0000:00:01.1: Error probing SMB2.
[ 8.074380] EDAC amd64_edac: Ver: 3.3.0 Feb 25 2010
[ 8.074447] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 8.074453] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 8.074454] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 8.074455] (Note that use of the override may cause unknown side effects.)
[ 8.074466] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 8.146141] lp: driver loaded but no devices found
[ 8.160320] ip_tables: © 2000-2006 Netfilter Core Team
[ 8.245212] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 8.245219] nvidia 0000:02:00.0: setting latency timer to 64
[ 8.245223] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:ow
ns=io+mem
[ 8.245314] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010
[ 8.660024] usb 1-2: reset high speed USB device using ehci_hcd and address 2
[ 9.035083] cfg80211: World regulatory domain updated:
[ 9.035085] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.035087] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.035089] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.035091] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.035092] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.035094] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.860020] usb 1-2: firmware: requesting ar9170.fw
[ 9.873043] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 9.873358] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 9.873362] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 9.873384] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 10.796878] ath: EEPROM regdomain: 0x8114
[ 10.796881] ath: EEPROM indicates we should expect a country code
[ 10.796883] ath: doing EEPROM country->regdmn map search
[ 10.796884] ath: country maps to regdmn code: 0x37
[ 10.796886] ath: Country alpha2 being used: DE
[ 10.796887] ath: Regpair used: 0x37
[ 10.968399] phy0: Selected rate control algorithm 'minstrel'
[ 10.968769] cfg80211: Calling CRDA for country: DE
[ 10.969814] cfg80211: Regulatory domain changed to country: DE
[ 10.969816] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.969818] (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 10.969820] (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 10.969821] (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 10.969895] Registered led device: ar9170-phy0::tx
[ 10.969906] Registered led device: ar9170-phy0::assoc
[ 10.969908] usb 1-2: Atheros AR9170 is registered as 'phy0'
[ 10.969934] usbcore: registered new interface driver ar9170usb
[ 14.228810] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.230226] alloc irq_desc for 28 on node 0
[ 14.230228] alloc kstat_irqs on node 0
[ 14.230235] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X
[ 14.230424] eth0: no link during initialization.
[ 14.230963] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.512755] usplash:400 freeing invalid memtype fffffffff9000000-fffffffff9e00000
[ 20.413651] ppdev: user-space parallel port driver
[ 58.665033] wlan0: direct probe to AP 06:24:fe:b0:d7:4b (try 1)
[ 58.665051] wlan0: direct probe to AP 06:24:fe:b0:d7:4b (try 1)
[ 58.667131] wlan0: direct probe responded
[ 58.667134] wlan0: authenticate with AP 06:24:fe:b0:d7:4b (try 1)
[ 58.670006] wlan0: authenticated
[ 58.670020] wlan0: associate with AP 06:24:fe:b0:d7:4b (try 1)
[ 58.671253] wlan0: RX AssocResp from 06:24:fe:b0:d7:4b (capab=0x411 status=0 aid=1)
[ 58.671256] wlan0: associated
[ 58.676400] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 59.730096] Intel AES-NI instructions are not detected.
[ 59.869027] padlock: VIA PadLock not detected.
[ 69.613762] wlan0: no IPv6 routers present