[Patti741852963]

Hey Ho,

Ich habe unter Ubuntu mit den smartmontools meine Daten auslesen lassen. Interpretiere ich das falsch, oder ist meine 1 Jahre alte Festplatte wirklich so abgenutzt?

Zitat

smartctl version 5.38 [i686-pc-linux-gnu] Copyright © 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: WDC WD5000BEVT-22ZAT0
Serial Number: WD-WXNY08SUA554
Firmware Version: 01.01A01
User Capacity: 500.107.862.016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Aug 5 00:36:24 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 246) Self-test routine in progress...
60% of test remaining.
Total time to complete Offline
data collection: (13200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 154) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 199 051 Pre-fail Always - 118
3 Spin_Up_Time 0x0027 185 183 021 Pre-fail Always - 1708
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 478
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 608
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 471
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 301
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 8551
194 Temperature_Celsius 0x0022 100 091 000 Old_age Always - 47
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 4

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 10% 594 972971682

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Viele Grüße,


Patrick

[Astorek]

Da du offensichtlich Linux benutzt (entnehme ich zumindest aus der ersten Zeile des Zitats), eine Frage: Betrifft das zufällig deinen Laptop? Falls ja, dürfte folgender Link für dich interessant sein: Festplatten-Bug (Zwar eine Ubuntu-Seite, der beschriebene Bug betrifft aber im Prinzip ALLE Notebooks; auch ich bin/war mit meinem Laptop davon betroffen...)

[Patti741852963]

ah ok... danke

[Stefan_der_held]

S.M.A.R.T.- Monitoring im BIOS aktivieren und gut is

SMART ist so oder so sehr tollerant in sachen Fehler und meldet sich nicht selten erst wenn datt kind inne brunne is

nen einfachen Oberflächen-Test reicht hier vollends aus.

Mittlerweile habe ich mir auch angewöhnt (aus beruflicher Erfahrung):

Alle Festplatten die treu ihren Dienst 1.5 Jahre getan haben werden auf neue Medien geklont :-) die heutigen HDDs halten einfach nicht mehr lange (hohe Speicherdichte == geringe Fehlertoleranz, Schnelle Leesearme == höhrere Abnutzung der Mechanik)

MFG

Stefan