WinFuture-Forum.de: Nero Beschreibt Keine Dvd - WinFuture-Forum.de

Zum Inhalt wechseln

Nachrichten zum Thema: Brennprogramme
Seite 1 von 1

Nero Beschreibt Keine Dvd Plextor DVD-RW 716A


#1 Mitglied ist offline   erna 

  • Gruppe: aktive Mitglieder
  • Beiträge: 36
  • Beigetreten: 09. Juli 05
  • Reputation: 0

  geschrieben 15. Januar 2006 - 21:24

Hallo,

ich habe mir den DVD-RW Plextor 716A zugelegt. Mit Nero vers. 6.6 und 7.x kommt es beim Brennversuch einer DVD zu einem Fehler.

Vorweg noch ein anderes Problem: der Brenner und die benutzten CD-Rohlinge der Marke Phillips unterstützen beim beschreiben einer CD max.48x
Jedoch kann ich eine CD nur mit 16x bis 24x beschreiben da ich sonst einen Buffer-Underrun bekommen, mit der Fehlermeldung, dass die Daten nicht schnell genug angeliefert werden konnten.
Sehr seltsam finde ich, dass es zum Buffer-Unerrun kommt, da der Brenner Burn-Proof unterstützt und diese Funktion beim Brenner und in Nero aktiviert ist.
-> Weiss jemand hierzu schon einen Rat?

Kommen wir aber zu meinem eigentlichen Problem: das beschreiben einer DVD sollte laut Brenner mit 16x funktionieren und auch die getesteten DVD-Rohlinge der Marke Phillips und Verbatim unterstützen diese Schreibgeschwindigkeit.
Nun habe ich mir eine Daten-DVD im ISO-Modus (UDF ebenfalls getestet) zusammengestellt und versuche diese zu brennen (alle Brenngeschwindigkeiten wurden schonm ausprobiert) und jedesmal erhalte ich folgende error-Log bzw. der Brennvorgang war nicht erfolgreich.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 06.05.2002 11:01:14 
ahead WinASPI: File 'F:\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32 

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder:			 <PLEXTOR DVDR   PX-716A>  Version: 1.09 - HA 1 TA 2 - 7.0.1.4
 Adapter driver:	  <IDE>					 HA 1
 Drive buffer  :	  8192kB
 Bus Type	  :	  default (0) -> ATAPI, detected: ?
CD-ROM:			   <Generic  DVD-ROM		 >Version: 1.0  - HA 1 TA 0 - 7.0.1.4
 Adapter driver:	  <SCSI>					HA 1

=== Scsi-Device-Map ===
DiskPeripheral	   : WDC WD800JB-00CRA1	  17.0	 ultra Port 0 ID 0  DMA: Off
DiskPeripheral	   : SAMSUNG SP2014N		 VC10	 ultra Port 0 ID 2  DMA: Off
CdRomPeripheral	  : Generic DVD-ROM		 1.0	d347prt Port 1 ID 0  DMA: Off
CdRomPeripheral	  : TOSHIBA DVD-ROM SD-M15021012	viadsk Port 2 ID 0  DMA: Off
CdRomPeripheral	  : PLEXTOR DVDR   PX-716A  1.09	viadsk Port 2 ID 1  DMA: Off
DiskPeripheral	   : IBM-DTTA-351010		 T56O	viadsk Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
Generic DVD-ROM			D:   CDRom0
TOSHIBA DVD-ROM SD-M1502   E:   CDRom1
PLEXTOR DVDR   PX-716A	 I:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE		   : 0
Physical memory	 : 1535MB (1572316kB)
Free physical memory: 1095MB (1121560kB)
Memory in use	   : 28 %
Uncached PFiles: 0x0
Use Inquiry	: 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

15.1.2006
ISO Zusammenstellung
20:44:09	#1 Text 0 File Isodoc.cpp, Line 6411
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate				: FALSE
	Write				   : TRUE
	Finalize CD			 : TRUE
	Multisession			: FALSE
	Burning mode			: DAO
	Mode					: 1
	ISO Level			   : 2 (Max. of 31 chars)
	Character set		   : ISO 9660
	Joliet				  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660;1 file extensions		: TRUE
	
20:44:09	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 81920KB of Memory
	
20:44:09	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
20:44:09	#4 ISO9660GEN -11 File Geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
20:44:09	#5 Text 0 File Burncd.cpp, Line 3342
	Turn on Disc-At-Once, using DVD media
	
20:44:09	#6 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:			2261471 (502:32.71, 4416MB)
	
20:44:09	#7 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD)
	
20:44:09	#8 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: PLEXTOR DVDR   PX-716A, Media type: DVD-R
	 Disc Manufacturer: MCC 03 - RG20  
	 Disc Application Code: 64, Disc Physical Code: 193
	
20:44:09	#9 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
20:44:09	#10 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
		2 indices, index0 (150) not provided
		original disc pos #0 + 2261472 (2261472) = #2261472/502:32.72
		relocatable, disc pos for caching/writing not required/ required, no patch infos
		-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2261472 blocks [I: PLEXTOR DVDR   PX-716A]
	--------------------------------------------------------------
	
20:44:09	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [I: PLEXTOR DVDR   PX-716A] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos			 0			 0	4631494656, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
___
		   0 |  lead-in |   0 |	0x41 | 0x00
		   0 |		1 |   0 |	0x41 | 0x00
		   0 |		1 |   1 |	0x41 | 0x00
	 2261472 | lead-out |   1 |	0x41 | 0x00
	
20:44:09	#12 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
20:44:09	#13 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
20:44:09	#14 Text 0 File Burncd.cpp, Line 4176
	Cache writing successful.
	
20:44:09	#15 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
20:44:09	#16 Phase 36 File dlgbrnst.cpp, Line 1725
	Burn process started at 4x (5.540 KB/s)
	
20:44:22	#17 Phase 38 File dlgbrnst.cpp, Line 1725
	Burn process failed at 4x (5.540 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 06.05.2002 11:01:08 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


wenn ich zuvor die optin "maximale schreibgeschw. ermitteln" und "Simulation" anklickeerhalte ich folgende error-Log:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 06.05.2002 11:01:14 
ahead WinASPI: File 'F:\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32 

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder:			 <PLEXTOR DVDR   PX-716A>  Version: 1.09 - HA 1 TA 2 - 7.0.1.4
 Adapter driver:	  <IDE>					 HA 1
 Drive buffer  :	  8192kB
 Bus Type	  :	  default (0) -> ATAPI, detected: ?
CD-ROM:			   <Generic  DVD-ROM		 >Version: 1.0  - HA 1 TA 0 - 7.0.1.4
 Adapter driver:	  <SCSI>					HA 1

=== Scsi-Device-Map ===
DiskPeripheral	   : WDC WD800JB-00CRA1	  17.0	 ultra Port 0 ID 0  DMA: Off
DiskPeripheral	   : SAMSUNG SP2014N		 VC10	 ultra Port 0 ID 2  DMA: Off
CdRomPeripheral	  : Generic DVD-ROM		 1.0	d347prt Port 1 ID 0  DMA: Off
CdRomPeripheral	  : TOSHIBA DVD-ROM SD-M15021012	viadsk Port 2 ID 0  DMA: Off
CdRomPeripheral	  : PLEXTOR DVDR   PX-716A  1.09	viadsk Port 2 ID 1  DMA: Off
DiskPeripheral	   : IBM-DTTA-351010		 T56O	viadsk Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
Generic DVD-ROM			D:   CDRom0
TOSHIBA DVD-ROM SD-M1502   E:   CDRom1
PLEXTOR DVDR   PX-716A	 I:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE		   : 0
Physical memory	 : 1535MB (1572316kB)
Free physical memory: 834MB (854520kB)
Memory in use	   : 45 %
Uncached PFiles: 0x0
Use Inquiry	: 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

15.1.2006
ISO Zusammenstellung
20:47:36	#1 Text 0 File Isodoc.cpp, Line 6411
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : TRUE
	Simulate				: TRUE
	Write				   : TRUE
	Finalize CD			 : TRUE
	Multisession			: FALSE
	Burning mode			: DAO
	Mode					: 1
	ISO Level			   : 2 (Max. of 31 chars)
	Character set		   : ISO 9660
	Joliet				  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660;1 file extensions		: TRUE
	
20:47:36	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 262144KB of Memory
	
20:47:36	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
20:47:36	#4 Text 0 File Writer.cpp, Line 113
	Writer I: PLEXTOR DVDR   PX-716A running
	
20:47:36	#5 ISO9660GEN -11 File Geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
20:47:36	#6 Text 0 File Burncd.cpp, Line 3342
	Turn on Disc-At-Once, using DVD media
	
20:47:36	#7 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:			2190815 (486:50.65, 4278MB)
	
20:47:36	#8 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD)
	
20:47:36	#9 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: PLEXTOR DVDR   PX-716A, Media type: DVD-R
	 Disc Manufacturer: MCC 03 - RG20  
	 Disc Application Code: 64, Disc Physical Code: 193
	
20:47:36	#10 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
20:47:36	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
		2 indices, index0 (150) not provided
		original disc pos #0 + 2190816 (2190816) = #2190816/486:50.66
		relocatable, disc pos for caching/writing not required/ required, no patch infos
		-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2190816 blocks [I: PLEXTOR DVDR   PX-716A]
	--------------------------------------------------------------
	
20:47:36	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [I: PLEXTOR DVDR   PX-716A] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos			 0			 0	4486791168, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
___
		   0 |  lead-in |   0 |	0x41 | 0x00
		   0 |		1 |   0 |	0x41 | 0x00
		   0 |		1 |   1 |	0x41 | 0x00
	 2190816 | lead-out |   1 |	0x41 | 0x00
	
20:47:36	#13 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
20:47:36	#14 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
20:47:36	#15 Text 0 File Burncd.cpp, Line 4176
	Cache writing successful.
	
20:47:36	#16 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
20:47:36	#17 Phase 28 File dlgbrnst.cpp, Line 1725
	Speed measurement started
	
20:47:36	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
20:50:08	#19 Text 0 File WriterStatus.cpp, Line 116
	<I: PLEXTOR DVDR   PX-716A> start writing Lead-Out at LBA 2190816 (216DE0h), length 0 blocks
	
20:50:08	#20 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
20:50:08	#21 Phase 29 File dlgbrnst.cpp, Line 1674
	Speed measurement completed: 22x (30.372 KB/s)
	
20:50:08	#22 Phase 32 File dlgbrnst.cpp, Line 1725
	Simulation started at 8x (11.080 KB/s)
	
20:50:47	#23 Phase 34 File dlgbrnst.cpp, Line 1725
	Simulation failed at 8x (11.080 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 06.05.2002 11:01:08 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


einen Defekt des Brenners schließe ich aus, da ich schon den dvd-brenner benq 1640 an meinem system getestet habe und hier kam es zu den gleichen Fehlern.

Weiss jemand einen Rat?

Vielen Dank im Voraus!
0

Anzeige



#2 Mitglied ist offline   Urne 

  • Gruppe: Moderation
  • Beiträge: 17.943
  • Beigetreten: 12. Juni 05
  • Reputation: 394
  • Geschlecht:Männlich
  • Wohnort:BL
  • Interessen:Computer

geschrieben 15. Januar 2006 - 21:36

Wenn ich das Logfile richtig deute, dann ist DMA ausgeschaltet.
Alkohol und Nikotin rafft die halbe Menschheit hin und nach alter Sitt und Brauch stirbt die andere Hälfte auch.
0

#3 Mitglied ist offline   erna 

  • Gruppe: aktive Mitglieder
  • Beiträge: 36
  • Beigetreten: 09. Juli 05
  • Reputation: 0

geschrieben 15. Januar 2006 - 21:51

Ich habe mich auch schon gewundert, warum Nero ausgibt, dass der DMA-Modus aus sei - dabei ist er bei allen Platten ON!

Laut einem ASPI-Check gibt es aber keine Konflikte? Zudem habe ich ASPI-Treiber v. 4.71 installiert.

Ich habe mal versucht eine Zusammenstellung mit NeroExpress zu brennen dabei kam eine fast gleiche Fehlermeldung lediglich mit dem Zusatz, dass der Buffer meines Plextor-Brenners zu groß! sei?!

siehe hier:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 06.05.2002 11:01:14 
ahead WinASPI: File 'F:\ero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32 

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
 (Nero Express)
Recorder:			 <PLEXTOR DVDR   PX-716A>  Version: 1.09 - HA 1 TA 2 - 7.0.1.4
 Adapter driver:	  <IDE>					 HA 1
 Drive buffer  :	  8192kB
 Bus Type	  :	  default (0) -> ATAPI, detected: ?
CD-ROM:			   <Generic  DVD-ROM		 >Version: 1.0  - HA 1 TA 0 - 7.0.1.4
 Adapter driver:	  <SCSI>					HA 1

=== Scsi-Device-Map ===
DiskPeripheral	   : WDC WD800JB-00CRA1	  17.0	 ultra Port 0 ID 0  DMA: Off
DiskPeripheral	   : SAMSUNG SP2014N		 VC10	 ultra Port 0 ID 2  DMA: Off
CdRomPeripheral	  : Generic DVD-ROM		 1.0	d347prt Port 1 ID 0  DMA: Off
CdRomPeripheral	  : TOSHIBA DVD-ROM SD-M15021012	viadsk Port 2 ID 0  DMA: Off
CdRomPeripheral	  : PLEXTOR DVDR   PX-716A  1.09	viadsk Port 2 ID 1  DMA: Off
DiskPeripheral	   : IBM-DTTA-351010		 T56O	viadsk Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
Generic DVD-ROM			D:   CDRom0
TOSHIBA DVD-ROM SD-M1502   E:   CDRom1
PLEXTOR DVDR   PX-716A	 I:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 1
BUFE		   : 0
Physical memory	 : 1535MB (1572316kB)
Free physical memory: 704MB (721512kB)
Memory in use	   : 54 %
Uncached PFiles: 0x0
Use Inquiry	: 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

15.1.2006
UDF Zusammenstellung
21:45:40	#1 Text 0 File Isodoc.cpp, Line 6411
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate				: FALSE
	Write				   : TRUE
	Finalize CD			 : TRUE
	Multisession			: FALSE
	Burning mode			: DAO
	Mode					: 1
	UDF Mode				: pure
	UDF Revision			: 1.02
	UDF Partition Type	  : physical
	
21:45:40	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 262144KB of Memory
	
21:45:40	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
21:45:40	#4 Text 0 File Writer.cpp, Line 113
	Writer I: PLEXTOR DVDR   PX-716A running
	
21:45:40	#5 Text 0 File Burncd.cpp, Line 3342
	Turn on Disc-At-Once, using DVD media
	
21:45:40	#6 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:			1419023 (315:20.23, 2771MB)
	
21:45:40	#7 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD)
	
21:45:40	#8 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: PLEXTOR DVDR   PX-716A, Media type: DVD-R
	 Disc Manufacturer: MCC 03 - RG20  
	 Disc Application Code: 64, Disc Physical Code: 193
	
21:45:40	#9 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
21:45:40	#10 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
		2 indices, index0 (150) not provided
		original disc pos #0 + 1419024 (1419024) = #1419024/315:20.24
		relocatable, disc pos for caching/writing not required/ required, no patch infos
		-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1419024 blocks [I: PLEXTOR DVDR   PX-716A]
	--------------------------------------------------------------
	
21:45:40	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [I: PLEXTOR DVDR   PX-716A] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos			 0			 0	2906161152, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
___
		   0 |  lead-in |   0 |	0x41 | 0x00
		   0 |		1 |   0 |	0x41 | 0x00
		   0 |		1 |   1 |	0x41 | 0x00
	 1419024 | lead-out |   1 |	0x41 | 0x00
	
21:45:40	#12 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
21:45:40	#13 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
21:45:40	#14 Text 0 File Burncd.cpp, Line 4176
	Cache writing successful.
	
21:45:40	#15 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
21:45:40	#16 Phase 36 File dlgbrnst.cpp, Line 1725
	Burn process started at 12x (16.620 KB/s)
	
21:46:32	#17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
21:46:32	#18 Text 0 File DVDR.cpp, Line 2580
	Recording mode: Sequential Recording Mode
	
21:46:32	#19 Text 0 File MMC.cpp, Line 21611
	Set BUFE: BURN-Proof -> ON 
	
21:46:32	#20 Text 0 File DVDR.cpp, Line 2735
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
21:46:32	#21 Text 0 File Cdrdrv.cpp, Line 8411
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
	 Disc Size: 120 mm,	  Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,	Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:		 0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:	  26127F h
	 End Sector Number in Layer 0:				 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:	 0 h
	 Media Specific [16..63]:
		  00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00	.`...0@P...!....
		  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00	................
		  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00	................
	
21:46:40	#22 SPTI -31 File SCSIPassThrough.cpp, Line 323
	I: CdRom2: SCSIStatus(x00) WinError(87) NeroError(-31)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x05290000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
21:46:40	#23 SPTI -31 File SCSIPassThrough.cpp, Line 323
	I: CdRom2: SCSIStatus(x00) WinError(87) NeroError(-31)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x05259600: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
21:46:40	#24 Text 0 File MMC.cpp, Line 19278
	Writer-Buffer for I: PLEXTOR DVDR   PX-716A reduced to 32768Bytes
	
21:46:40	#25 SPTI -31 File SCSIPassThrough.cpp, Line 323
	I: CdRom2: SCSIStatus(x00) WinError(87) NeroError(-31)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 10 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x05259600: Len x8000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
21:46:40	#26 CDR -31 File Writer.cpp, Line 302
	Buffer too large
	I: PLEXTOR DVDR   PX-716A
	
21:46:40	#27 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
21:46:40	#28 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
21:46:40	#29 Text 0 File DVDR.cpp, Line 2978
	EndDAO: Last written address was -1
	
21:46:40	#30 Phase 38 File dlgbrnst.cpp, Line 1725
	Burn process failed at 12x (16.620 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 06.05.2002 11:01:08 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Danke für die weitere Mithilfe! :D
0

#4 Mitglied ist offline   DK2000 

  • Gruppe: Administration
  • Beiträge: 19.794
  • Beigetreten: 19. August 04
  • Reputation: 1.434
  • Geschlecht:Männlich
  • Wohnort:Oben auf dem Berg
  • Interessen:Essen, PC, Filme, TV Serien...

geschrieben 16. Januar 2006 - 17:14

Den Fehler mit KEY_NO_SENSE (der eigentlich kein Fehler ist), hatte ich da auch mit Nero 7. Nach ein paar Rohlingen habe ich es aufgegeben und wieder Nero 6.0.1.2 installiert. Das Problem konnte ich bei mir nicht einordnen. Mit Nero 6 läuft allerdings alles einwandfrei.

Was bei den Laufwerken DMA: Off angeht, scheint bei Nero 6/7 normal zu sein. Sofern man nicht den Windows Standard Treiber verwendet (atapi.sys), scheint Nero den DMA Status nicht wirklich ermitteln zu können. Solange in der Systemsteuerung für die IDE Treiber DMA angezeigt wird, ist alles in Ordnung.

Würde aber dennoch mal den ASPI 4.71 deinstallieren. Nero braucht den nicht und der 4.71 funktioniert ohne Adaptec Hardware sowieso nicht richtig. Wenn Du Software verwendest, welche zwingend den Aspi benötigen, würde ich die 4.60 installieren, ansonsten ist er komplett überflüssig.

Dieser Beitrag wurde von DK2000 bearbeitet: 16. Januar 2006 - 17:17

Ich bin kein Toilettenpapier-Hamster.
---
Ich bin ein kleiner, schnickeldischnuckeliger Tiger aus dem Schwarzwald.
Alle haben mich ganz dolle lila lieb.
0

#5 Mitglied ist offline   erna 

  • Gruppe: aktive Mitglieder
  • Beiträge: 36
  • Beigetreten: 09. Juli 05
  • Reputation: 0

geschrieben 16. Januar 2006 - 18:52

So nun habe ich sämtliche ASPI-Treiber von meinem System entfernt - der Fehler bleibt bestehen. Dann habe ich aus dem Nero Core Verzeichnis "Core\Wnaspi32.dll': Ver=2.0.1.74," die aspi Datei entfernt - der Fehler bleibt weiterhin bestehen - die error-log in der nicht viel anderes steht enthalte ich euch aber nicht vor :rolleyes:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder:			 <PLEXTOR DVDR   PX-716A>  Version: 1.09 - HA 1 TA 2 - 7.0.1.4
 Adapter driver:	  <IDE>					 HA 1
 Drive buffer  :	  8192kB
 Bus Type	  :	  default (0) -> ATAPI, detected: ?
CD-ROM:			   <Generic  DVD-ROM		 >Version: 1.0  - HA 1 TA 0 - 7.0.1.4
 Adapter driver:	  <SCSI>					HA 1

=== Scsi-Device-Map ===
DiskPeripheral	   : WDC WD800JB-00CRA1	  17.0	 ultra Port 0 ID 0  DMA: Off
DiskPeripheral	   : SAMSUNG SP2014N		 VC10	 ultra Port 0 ID 2  DMA: Off
CdRomPeripheral	  : Generic DVD-ROM		 1.0	d347prt Port 1 ID 0  DMA: Off
CdRomPeripheral	  : TOSHIBA DVD-ROM SD-M15021012	viadsk Port 2 ID 0  DMA: Off
CdRomPeripheral	  : PLEXTOR DVDR   PX-716A  1.09	viadsk Port 2 ID 1  DMA: Off
DiskPeripheral	   : IBM-DTTA-351010		 T56O	viadsk Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
Generic DVD-ROM			D:   CDRom0
TOSHIBA DVD-ROM SD-M1502   E:   CDRom1
PLEXTOR DVDR   PX-716A	 I:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 1
BUFE		   : 0
Physical memory	 : 1535MB (1572316kB)
Free physical memory: 1093MB (1119240kB)
Memory in use	   : 28 %
Uncached PFiles: 0x0
Use Inquiry	: 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

16.1.2006
ISO Zusammenstellung
18:47:57	#1 Text 0 File Isodoc.cpp, Line 6411
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate				: FALSE
	Write				   : TRUE
	Finalize CD			 : TRUE
	Multisession			: FALSE
	Burning mode			: DAO
	Mode					: 1
	ISO Level			   : 2 (Max. of 31 chars)
	Character set		   : ISO 9660
	Joliet				  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660;1 file extensions		: TRUE
	
18:47:57	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 262144KB of Memory
	
18:47:57	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
18:47:57	#4 ISO9660GEN -11 File Geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
18:47:57	#5 Text 0 File Burncd.cpp, Line 3342
	Turn on Disc-At-Once, using DVD media
	
18:47:58	#6 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:			2285759 (507:56.59, 4464MB)
	
18:47:58	#7 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD)
	
18:47:58	#8 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: PLEXTOR DVDR   PX-716A, Media type: DVD-R
	 Disc Manufacturer: MCC 03 - RG20  
	 Disc Application Code: 64, Disc Physical Code: 193
	
18:47:58	#9 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
18:47:58	#10 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
		2 indices, index0 (150) not provided
		original disc pos #0 + 2285760 (2285760) = #2285760/507:56.60
		relocatable, disc pos for caching/writing not required/ required, no patch infos
		-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285760 blocks [I: PLEXTOR DVDR   PX-716A]
	--------------------------------------------------------------
	
18:47:58	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [I: PLEXTOR DVDR   PX-716A] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos			 0			 0	4681236480, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
___
		   0 |  lead-in |   0 |	0x41 | 0x00
		   0 |		1 |   0 |	0x41 | 0x00
		   0 |		1 |   1 |	0x41 | 0x00
	 2285760 | lead-out |   1 |	0x41 | 0x00
	
18:47:58	#12 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
18:47:58	#13 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
18:47:58	#14 Text 0 File Burncd.cpp, Line 4176
	Cache writing successful.
	
18:47:58	#15 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
18:47:58	#16 Phase 36 File dlgbrnst.cpp, Line 1725
	Burn process started at 16x (22.160 KB/s)
	
18:49:03	#17 Phase 38 File dlgbrnst.cpp, Line 1725
	Burn process failed at 16x (22.160 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Wenn ich mit dem "AVS Disc Creator" eine DVD beschreiben will, so bekomme ich nach dem Cachen der Dateien und "starten des Brennvorgangs" die Fehlermeldung "Error write buffer sectors"

jemand noch eine idee?
0

#6 Mitglied ist offline   erna 

  • Gruppe: aktive Mitglieder
  • Beiträge: 36
  • Beigetreten: 09. Juli 05
  • Reputation: 0

geschrieben 20. Januar 2006 - 14:55

Alles wieder i.O.! ;D

nach dem ich die via hyperion Treiber (v.504) deinstalliert habe können nun auch DVDs beschrieben werden!
-> zudem wird der DMA Modus / bzw. zu verwendete Treiber und Controller richtig ausgegeben.

Hier die log eines erfolgreichen DVD-beschreibens:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 13.09.2001 09:51:38 

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder:			 <PLEXTOR DVDR   PX-716A>  Version: 1.09 - HA 1 TA 1 - 7.0.1.4
 Adapter driver:	  <IDE>					 HA 1
 Drive buffer  :	  8192kB
 Bus Type	  :	  default (0) -> ATAPI, detected: ?
CD-ROM:			   <TOSHIBA  DVD-ROM SD-M1502>Version: 1012 - HA 1 TA 0 - 7.0.1.4
 Adapter driver:	  <IDE>					 HA 1

=== Scsi-Device-Map ===
CdRomPeripheral	  : TOSHIBA DVD-ROM SD-M1502		 atapi Port 0 ID 0  DMA: On 
CdRomPeripheral	  : PLEXTOR DVDR   PX-716A		   atapi Port 0 ID 1  DMA: On 
DiskPeripheral	   : IBM-DTTA-351010				  atapi Port 1 ID 0  DMA: On 
DiskPeripheral	   : WDC WD800JB-00CRA1	  17.0	 ultra Port 2 ID 0  DMA: Off
DiskPeripheral	   : SAMSUNG SP2014N		 VC10	 ultra Port 2 ID 2  DMA: Off
CdRomPeripheral	  : Generic DVD-ROM		 1.0	d347prt Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1502   D:   CDRom0
PLEXTOR DVDR   PX-716A	 E:   CDRom1
Generic DVD-ROM			I:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 1
BUFE		   : 0
Physical memory	 : 1535MB (1572316kB)
Free physical memory: 834MB (854020kB)
Memory in use	   : 45 %
Uncached PFiles: 0x0
Use Inquiry	: 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

19.1.2006
ISO Zusammenstellung
13:21:26	#1 Text 0 File Isodoc.cpp, Line 6411
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate				: FALSE
	Write				   : TRUE
	Finalize CD			 : TRUE
	Multisession			: FALSE
	Burning mode			: DAO
	Mode					: 1
	ISO Level			   : 1 (Max. of 11 = 8 + 3 char)
	Character set		   : ISO 9660
	Joliet				  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660;1 file extensions		: TRUE
	
13:21:26	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 262144KB of Memory
	
13:21:26	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
13:21:26	#4 Text 0 File Writer.cpp, Line 113
	Writer E: PLEXTOR DVDR   PX-716A running
	
13:21:26	#5 ISO9660GEN -11 File Geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
13:21:26	#6 Text 0 File Burncd.cpp, Line 3342
	Turn on Disc-At-Once, using DVD media
	
13:21:26	#7 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:			2242095 (498:14.45, 4379MB)
	
13:21:26	#8 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD)
	
13:21:26	#9 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: PLEXTOR DVDR   PX-716A, Media type: DVD-R
	 Disc Manufacturer: MCC 03 - RG20  
	 Disc Application Code: 64, Disc Physical Code: 193
	
13:21:26	#10 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
13:21:26	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
		2 indices, index0 (150) not provided
		original disc pos #0 + 2242096 (2242096) = #2242096/498:14.46
		relocatable, disc pos for caching/writing not required/ required, no patch infos
		-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2242096 blocks [E: PLEXTOR DVDR   PX-716A]
	--------------------------------------------------------------
	
13:21:26	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [E: PLEXTOR DVDR   PX-716A] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos			 0			 0	4591812608, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
___
		   0 |  lead-in |   0 |	0x41 | 0x00
		   0 |		1 |   0 |	0x41 | 0x00
		   0 |		1 |   1 |	0x41 | 0x00
	 2242096 | lead-out |   1 |	0x41 | 0x00
	
13:21:26	#13 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
13:21:26	#14 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
13:21:27	#15 Text 0 File Burncd.cpp, Line 4176
	Cache writing successful.
	
13:21:27	#16 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
13:21:27	#17 Phase 36 File dlgbrnst.cpp, Line 1725
	Burn process started at 16x (22.160 KB/s)
	
13:21:27	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
13:21:27	#19 Text 0 File DVDR.cpp, Line 2580
	Recording mode: Sequential Recording Mode
	
13:21:27	#20 Text 0 File MMC.cpp, Line 21611
	Set BUFE: BURN-Proof -> ON 
	
13:21:27	#21 Text 0 File DVDR.cpp, Line 2735
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
13:21:27	#22 Text 0 File Cdrdrv.cpp, Line 8411
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
	 Disc Size: 120 mm,	  Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,	Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:		 0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:	  26127F h
	 End Sector Number in Layer 0:				 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:	 0 h
	 Media Specific [16..63]:
		  00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00	.`...0@P...!....
		  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00	................
		  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00	................
	
13:21:33	#23 Text 0 File Cdrdrv.cpp, Line 1197
	13:21:33.973 - E: PLEXTOR DVDR   PX-716A : Queue again later
	
13:28:57	#24 Text 0 File WriterStatus.cpp, Line 116
	<E: PLEXTOR DVDR   PX-716A> start writing Lead-Out at LBA 2242096 (223630h), length 0 blocks
	
13:28:57	#25 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
13:28:57	#26 Text 0 File DVDR.cpp, Line 2978
	EndDAO: Last written address was 2242095
	
13:29:15	#27 Phase 37 File dlgbrnst.cpp, Line 1725
	Burn process completed successfully at 16x (22.160 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 13.09.2001 09:51:32 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

0

#7 Mitglied ist offline   snipe122 

  • Gruppe: aktive Mitglieder
  • Beiträge: 372
  • Beigetreten: 17. Januar 06
  • Reputation: 0

  geschrieben 20. Januar 2006 - 17:09

Das ist nämlich das problem bei boards mit via-chipsatz. ohne die treiber läuft nix im DMA und demzufolge verbrennt man nur es sei denn man brennt 2x...

man bräuchte schon einen richtigen dampfhammer um im piomode 48x bzw. dvd 16x beschreiben zu können :yuk: ist unmöglich... das frisst soviel cpu-zeit da ist nichts zu machen.

auch bei iNTEL systemen tritt dieser fehler u.U. auf, wenn DMA zwar verfügbar ist jedoch nich aktiviert. Ich hatte unlängst das problem das dma auf einmal nicht mehr aktiviert war da das BIOS meinen brenner manchmal komischerweise nicht erkennt, windows jedoch wie gehabt, nur halt im pio-modus. nichts ahnend dann ne dvd gebrannt und gewundert warum immer aussetzer sind und der rechner übelst lahmte ;( ein neustart behob das problem... :)

achso und wenn nero dma: off anzeigt, heisst das meistens auch immer dma: off :)


gruss
snipe
0

#8 _max_

  • Gruppe: Gäste

geschrieben 20. Januar 2006 - 19:18

Beitrag anzeigenZitat (snipe122: 20.01.2006, 17:09)

Das ist nämlich das problem bei boards mit via-chipsatz. ohne die treiber läuft nix im DMA und demzufolge verbrennt man nur es sei denn man brennt 2x...

Aber er hat ja den treiber deinstalliert.

Zitat

achso und wenn nero dma: off anzeigt, heisst das meistens auch immer dma: off :yuk:

Das stimmt nicht. Nero entnimmt die Information vom DMA-Modus nur vom Standardtreiber. Bei allen anderen verwendeten Treiber wird in der Nero-Log DMA off angezeigt obwohl dies nicht der Fall ist.

@erna: Auch wenn der Brenner BurnProof unterstützt, heißt das nicht, dass es zu keinem Buffer-Underrun kommen kann. Es wird nur der interne Puffer des Brenners (meist 2 MB groß) überwacht, nicht die zu schreibenden Daten, die im RAM gepuffert werden.

Dieser Beitrag wurde von max bearbeitet: 20. Januar 2006 - 19:26

0

#9 Mitglied ist offline   snipe122 

  • Gruppe: aktive Mitglieder
  • Beiträge: 372
  • Beigetreten: 17. Januar 06
  • Reputation: 0

geschrieben 20. Januar 2006 - 19:29

hat sich erledigt ... (damit sich keiner den mist durchliest hab ichs rausgenommen) :yuk:

Dieser Beitrag wurde von snipe122 bearbeitet: 20. Januar 2006 - 20:04

0

#10 _max_

  • Gruppe: Gäste

geschrieben 20. Januar 2006 - 19:32

Beitrag anzeigenZitat (erna: 20.01.2006, 14:55)

Alles wieder i.O.! :yuk:

nach dem ich die via hyperion Treiber (v.504) deinstalliert habe können nun auch DVDs beschrieben werden!
-> zudem wird der DMA Modus / bzw. zu verwendete Treiber und Controller richtig ausgegeben.

Hier die log eines erfolgreichen DVD-beschreibens:

Verstehe ich hier was falsch?
0

#11 Mitglied ist offline   snipe122 

  • Gruppe: aktive Mitglieder
  • Beiträge: 372
  • Beigetreten: 17. Januar 06
  • Reputation: 0

  geschrieben 20. Januar 2006 - 20:00

uiuiui :) wer lesen kann ist klar im vorteil hab das "de" vor "installiert" gerade mal eben so weggelassen :yuk: sorry. mach mir erstmal ein pils auf, dann klappts auch mit dem lesen!


gruss
snipe ;(
0

Thema verteilen:


Seite 1 von 1

1 Besucher lesen dieses Thema
Mitglieder: 0, Gäste: 1, unsichtbare Mitglieder: 0