[SPUTUM]

Tomato 1.11.1217

Zitat

Changelog:

• Fixed UPnP entries are lost when some settings are changed.
  
• Fixed RIP config causing distribution of indirect routes.
  
• FTP NAT helper can now be disabled in Advanced/CTNF.
  
• Bandwidth data can now be saved on reboot/shutdown.
  
• Added a reboot and reconnect scheduler (Admin/Scheduler).
  
• Decreased time interval from 30 mins to 15 mins for Access Restriction.
  
• Updated New Zealand timezone.
  
• Updated L7 patterns to l7-protocols-2007-10-10.
  
• Rolled back recent changes from 4.30.11 and iptables to fix a forwarding bug that some are experiencing. I've been unable to replicate the problem, but have received some good feedback on this, so hopefully this does fix it for everyone.

Homepage: http://www.polarcloud.com/tomato
FAQ: http://www.polarcloud.com/tomatofaq
Download: http://www.polarcloud.com/tomato_111

Edit: Für alle, die Tomato virtuell testen möchten:
Virtual Tomato GUI: http://lampiweb.com/...tatus-index.htm

Dieser Beitrag wurde von SPUTUM bearbeitet: 14. November 2007 - 22:50

[SPUTUM]

Tomato 1.13.1252

Zitat

Tomato 1.13.1252
Fixed problem with L2TP, PPPoE, PPTP.

Changes in 1.12 in case you missed it:
Added WHR-HP-G54 transmit amplifier and enhanced receive options in Advanced/Wireless.
Added DNS-O-Matic and eNom DDNS support.
Added/fixed WBR-G54 support thanks to John M.
Updated South Australia TZ.
NAT loopback (Advanced/Firewall) now has more options: Enabled, Forwarded Only and Disabled.
Removed obsolete Telstra/heartbeat/bpalogin support.
Updated to l7-protocols-2007-11-22.

Homepage und Download: http://www.polarcloud.com/tomato
FAQ: http://www.polarcloud.com/tomatofaq
Virtual Tomato GUI: http://lampiweb.com/...tatus-index.htm

[SPUTUM]

Tomato 1.14.1288

Zitat

• Fixed possible cross-site vulnerability in web admin.
  
• Fixed saving SSL certificate to nvram.
  
• Fixed problem with NAT Loopback thanks to John M. It's now the default setting.
  
• New favicon thanks to David V.
  
• Microsoft MN-700 ID'd thanks to John F.
  
• Network Label can now be entered for OpenDNS.
  
• Upgraded Busybox to 1.9.0.
  
• Upgrade L7 filters to l7-protocols-2008-01-16.

Homepage und Download: http://www.polarcloud.com/tomato
FAQ: http://www.polarcloud.com/tomatofaq
Virtual Tomato GUI: http://lampiweb.com/...tatus-index.htm

[SPUTUM]

Tomato 1.15.1297

Zitat

Changelog:
Downgraded busybox back to 1.2 for now. The upgrade seems to have caused a few problems with things like DHCP. Note: This is the same version used prior to Tomato 1.14. It's stable and from a user's viewpoint, you shouldn't see any change in functionality between the two.

If you're having problems with loosing Internet connection after a while and you're using DHCP, please try this version

Homepage und Download: http://www.polarcloud.com/tomato
FAQ: http://www.polarcloud.com/tomatofaq
Deutsches Wiki: http://de.wikibooks....mato_(Firmware)
Virtual Tomato GUI: http://lampiweb.com/...tatus-index.htm

Dieser Beitrag wurde von SPUTUM bearbeitet: 29. Januar 2008 - 00:26

[SPUTUM]

Tomato Firmware v1.16.1373

Zitat

• More logging, fixes for PPPoE support. Thanks to Walter & Markus for lots of testing.
  
• Updated igmprt. This might fix a problem with it dying unexpectedly.
  
• Updated squashfs.
  
• Updated Dnsmasq 2.41.
  
• Updated L7 2008-02-10.
  
• Fixed route was changed incorrectly on renew when using L2TP.
  
• Fixed ping page.
  
• Behavior of how the WEP keys are handled has changed. Previous versions forced the selected key to #1 internally. If you encounter problems, please make sure the key # is correct, or use key #1 manually.
  
• Behavior of WHR-HP-G54's Enhanced RX's (Adv/Wireless) has been swapped. Please verify that it's working correctly.
  
• Support for DynDNS via HTTPS added.
  
• A separate test build with newer drivers (-ND) is now available. It's for the WHR-G125 and WRH54G, but it will also work on a few other routers. Not a lot of testing has gone into this, and it will definitely *not* run correctly on all routers that run just fine on the "normal" firmware, so *please use with caution*. Thanks to George for making it work on the WHR-G125.

Homepage und Download: http://www.polarcloud.com/tomato
FAQ: http://www.polarcloud.com/tomatofaq
Deutsches Wiki: http://de.wikibooks....mato_(Firmware)
Virtual Tomato GUI: http://lampiweb.com/...tatus-index.htm

[SPUTUM]

Tomato Firmware v1.17.1385

Zitat

Changelog:

• Fixed PPPoE connect on demand.
  
• Fixed DHCP not passing current DNS address.
  
• Fixed TZO external IP check results in chopped address.
  
• Lenghtened DDNS hostname field.

Homepage und Download: http://www.polarcloud.com/tomato
FAQ: http://www.polarcloud.com/tomatofaq
Deutsches Wiki: http://de.wikibooks....mato_(Firmware)
Virtual Tomato GUI: http://lampiweb.com/...tatus-index.htm

[danysahne]

Hallo,

auf meinen Linksys WRT54 G habe ich die letzten Tage eine aktuelle tomato Firmware draufgespielt.

Jetzt habe ich folgendes großes Problem:

Der Router verbindet sich per PPPoE bei meinem Provider und die Internetverbindung steht auch. (connected)
Skype funktioniert auch prima, nur habe ich jetzt das Problem, dass ich keine Web Seiten aufrufen kann. Der Rechner greift mit einer festen ip-Adresse auf den Router zu. Die IP-Adresse befindet sich auch im eingebenen Adressbereich des Routers. Gateway, Subnetz eingetragen alles ok..

Ich habe mir schon das wikibook zu tomato mehrmals durchgelesen doch irgendwo fehlt scheinbar ne Einstellung damit der PC auch per Browser ins I-Net kann. An der Firewall des Rechners kanns auch net liegen, denn die ist momentan deaktiviert.

Kann mir jemand helfen welche Einstellungen da noch fehlen bzw. geändert werden muessen.


Über die normale Verbindung über Modem (also ohne Router dazwischen) direkt PPPOE funktioniert alles, dh. kann eigentlich nur am Router (Firmware) liegen..

Vielen Dank für Lösungen!!

Grüße danysahne

[SPUTUM]

Tomato Firmware v1.18.1441

Zitat

Changelog:

• Fixed PPPoE may exit instead of retrying during a connection attempt.
  
• DHCP (udhcpc) logging is now optional. To enable, go to Admin/Logging.
  
• Added custom entries and support for "every x minutes" in Admin/Scheduler.
  
• Increased Basic/Wireless Filter limit to 100.
  
• A few changes to hopefully improve speed: Use jhash for conntrack, increase route cache hash size, increase default conntrack size, option for SYN/FIN/RST prioritization (see QOS/Settings). Thanks to Rodney C.
  
• Updated Venezuela, South Australia TZ.
  
• Updated Dropbear 0.51.

Homepage und Download: http://www.polarcloud.com/tomato
FAQ: http://www.polarcloud.com/tomatofaq
Deutsches Wiki: http://de.wikibooks....mato_(Firmware)
Virtual Tomato GUI: http://lampiweb.com/...tatus-index.htm

[SPUTUM]

Tomato Firmware v1.19.1463

Zitat

Changelog:

• Removed route hash size changes. This seems to have caused overflow and "rusty's brain broke" errors for some people.
  
• Fixed disabled GUI button was not dimmed.
  
• Updated DST for France, Germany, Italy, Poland, Sweden timezones.
  
• Updated L7 patterns 2008-02-20.

Homepage und Download: http://www.polarcloud.com/tomato
FAQ: http://www.polarcloud.com/tomatofaq
Deutsches Wiki: http://de.wikibooks....mato_(Firmware)
Virtual Tomato GUI: http://lampiweb.com/...tatus-index.htm

[SPUTUM]

Für alle experimentierfreudigen User, hier eine interessante Tomato Modifikation:

Tomato 1.19.8850 mod by Victek

Zitat

Changes over Oficial Tomato 1.19

1.19.8815

Updated to BusyBox 1.10.2 (IP WAN DHCP renew tested and fixed)
JHash Conntrack 8092 connection (Speed Mod)
Conntrack default values adjusted for high P2P load
Theme for visual handicaped
Eight additional themes, Bluedream, Enlightenedd, Tijuana, Asus, Linksys, Buffalo
Spain TZ included
CPU Frequency.
Previous IP display
Two additional window for Button script
Bandwidth Limiter per IP/MAC
Code Optimization

1.19.8850

Bug Fix in DHCP/DNS menu SAVE button
Mandatory fields in Basic/Identification
BusyBox 1.10.3 (new commands added).

Weitere Infos und Download: http://www.linksysin...ead.php?t=57912

[Daniel]

Die mod läuft super, es gibt keine Probleme bei mir!

[SPUTUM]

Tomato Firmware v1.20.1481

Zitat

• Updated to dnsmasq 2.43. This takes care of the CERT VU#800113 security issue.
  
• Fixed setting custom scheduler time doesn't save correctly.
  
• Updated to L7 patterns 2008-04-23
  
• Static DHCP limit increased to 100.
  
• Added EasyDNS HTTPS support.
  
• Added date format option for Bandwidth/* pages.

Homepage und Download: http://www.polarcloud.com/tomato
FAQ: http://www.polarcloud.com/tomatofaq
Deutsches Wiki: http://de.wikibooks....mato_(Firmware)

Dieser Beitrag wurde von SPUTUM bearbeitet: 13. Juli 2008 - 20:05

[sкavєи]

Die Version wurde wegen DNS- und DHCP-Problemen wieder zurückgezogen.

[Daniel]

Also ich hab mit der neuesten Version keine Probleme...nur so nebenbei, aber das kann wohl variieren

[SPUTUM]

Tomato Mod 1.20.8000 by Victek

Zitat

Here it's, changed over original Tomato 1.20

*BusyBox 1.11.1
*DNSMasq 2.44 (DNS reported bug fixed.. apparently)
*Dropbear 0.51
*Extended static DHCP / MAC restriction (up to 100 clients)
*IP/MAC Bandwidth Limiter
*Extended themes
*CPU Freq. display / Previous WAN MAC
*Two additional button script window
*SpeedMod 8502

Bezüglich des DNS/DHCP Problems der Original Tomato Firmware und dieser Mod:

Zitat

Read the changelog, I use a new DNSmasq version released by the author of DNSmasq (kelleys.org), so, my mod is not using the DNSmasq version that created the bug in the oficial first Tomato release.

Weitere Infos: http://www.linksysin...ead.php?t=58521
Download: http://victek.is-a-g...com/tomato.html