[lord_fritte]

Hallo ich habe ein Problem ich bekomme meine TV Karte nicht ans Laufen.
Als erstes habe ich zum Testen xawtv installiert, beim versuch es über das Terminal zu starten kam folgender Fehler:

This is xawtv-3.94, running on Linux/i686 (2.6.15-26-386)
X Error of failed request:  XF86DGANoDirectVideoMode
  Major opcode of failed request:  136 (XFree86-DGA)
  Minor opcode of failed request:  1 (XF86DGAGetVideoLL)
  Serial number of failed request:  65
  Current serial number in output stream:  65

Zum Testen habe ich ein Paar Befehle versucht:
dmesg | grep bttv: ergab nichts
lspci: ergab:

0000:00:00.0 Host bridge: ALi Corporation M1695 K8 Northbridge [PCI Express and HyperTransport]
0000:00:01.0 PCI bridge: ALi Corporation: Unknown device 524b
0000:00:02.0 PCI bridge: ALi Corporation: Unknown device 524c
0000:00:04.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip]
0000:00:05.0 PCI bridge: ALi Corporation AGP8X Controller
0000:00:06.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
0000:00:07.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
0000:00:07.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
0000:00:08.0 Multimedia audio controller: ALi Corporation M5455 PCI AC-Link Controller Audio Device (rev 20)
0000:00:11.0 Ethernet controller: ALi Corporation M5263 Ethernet Controller (rev 40)
0000:00:12.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
0000:00:12.1 IDE interface: ALi Corporation ULi 5289 SATA (rev 10)
0000:00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0290 (rev a1)
0000:04:05.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)

Angaben zum System:

Prozessor: AMD Athlon 64 3000+ (S939)
Mainboard: Asrock 939Dual-SATAII
Grafikkarte: Sparkle GeForce 7900GTX 512MB
TV-Karte: Hauppauge Win-TV PVR 150 MCE

Linux: Ubuntu 6.06, 32-Bit
Oderfläche: Gnome 2.14.3

[shiversc]

die kernel-version lässt vermuten, das du ubuntu einsetzt?
wenn das der fall ist, dann guck mal nach /lib/firmware/kernel-version ob dort auch die firmware vorliegt. wenn du eine andere distri einsetzt, dann kann es sein, dass der pfad anders ist.

edit: vorletzte zeile steht es ja... ubuntu 6.06

Dieser Beitrag wurde von shiversc bearbeitet: 11. September 2006 - 07:09

[lord_fritte]

wie muss die datei denn aussehen?

[janboe]

http://www.vdr-wiki.de/wiki/index.php/Haup...uge_PVR_150_MCE

[lord_fritte]

weis zufällig jemand wie man ivtv zum laufen bekommt?

[Ryu]

vieleicht hilft dir dies .. sorry hatte nicht viel zeit zum suchen

http://www.ivtvdrive...hp/Howto:Fedora

muste hald für dein sys ein wenig improvisieren aber sollte funzen da die revision der karte eine CX23416 is sagt zumindest dein dmesg

oder vieleicht hilft das

http://ubuntuforums....hp/t-77389.html

Dieser Beitrag wurde von Ryu bearbeitet: 11. September 2006 - 18:10

[lord_fritte]

Ja muss ich gucken wie das mit meinem schlechten englisch schaffe.

[Ryu]

wird schon gehen hab auch so angefangen linux und englisch gehöhren fast zusammen

[d2kx]

Kanotix 2006 VDR RC6 ist auch besonders gut für TV Karten *Werbung mach*

http://debian.tu-bs.de/project/kanotix/pre...006-VDR-RC6.iso

[lord_fritte]

Ich habe ivtv fast drauf, aber ich bekomme ein paar fehler

[17179587.680000] ivtv:  ==================== START INIT IVTV ====================
[17179587.680000] ivtv:  version 0.4.6 (tagged release) loading
[17179587.680000] ivtv:  Linux version: 2.6.15-26-386 preempt 486 gcc-4.0
[17179587.680000] ivtv:  In case of problems please include the debug info between
[17179587.680000] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with[17179587.680000] ivtv:  any module options, when mailing the ivtv-users mailinglist.
[17179587.692000] FDC 0 is a post-1991 82077
[17179587.768000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[17179587.768000] usbcore: registered new driver usblp
[17179587.768000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179588.152000] usbcore: registered new driver hiddev
[17179588.168000] input: Logitech USB Mouse as /class/input/input2
[17179588.168000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2
[17179588.192000] hiddev96: USB HID v1.10 Device [aqua computer aquaero 4.00] on usb-0000:00:13.2-2.1
[17179588.192000] usbcore: registered new driver usbhid
[17179588.192000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179588.292000] usbcore: registered new driver snd-usb-audio
[17179588.628000] AC'97 1 does not respond - RESET
[17179588.628000] AC'97 1 access is not valid [0xffffffff], removing mixer.
[17179588.628000] Unable to initialize codec #1
[17179588.684000] intel8x0_measure_ac97_clock: measured 55014 usecs
[17179588.684000] intel8x0: clocking to 48000
[17179588.688000] ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
[17179588.688000] ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179588.688000] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[17179588.812000] ts: Compaq touchscreen protocol output
[17179588.972000] tveeprom: ivtv version
[17179588.972000] tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 8400430
[17179588.972000] tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38)
[17179588.972000] tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
[17179588.972000] tveeprom: audio processor = CX25843 (type = 25)
[17179588.972000] tveeprom: decoder processor = CX25843 (type = 1e)
[17179588.972000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
[17179588.988000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
[17179588.988000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
[17179589.156000] cx25840 1-0044: ivtv driver
[17179589.156000] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[17179589.192000] cx25840 1-0044: unable to open firmware v4l-cx25840.fw
[17179589.260000] ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
[17179589.284000] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
[17179589.296000] ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
[17179589.308000] tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
[17179589.308000] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
[17179589.936000] ivtv0: unable to open firmware v4l-cx2341x-enc.fw
[17179589.936000] ivtv0: did you put the firmware in the hotplug firmware directory?
[17179589.936000] ivtv0 warning: failed loading encoder firmware
[17179589.936000] ivtv0 warning: Error loading firmware -3!
[17179589.936000] ivtv0: Error -3 initializing firmware.
[17179589.936000] ivtv0: Error -12 on initialization
[17179589.936000] ivtv: probe of 0000:04:05.0 failed with error -12
[17179589.936000] ivtv:  ====================  END INIT IVTV  ====================

[lord_fritte]

Ich hab noch ein bisschen gebastelt und jetzt steht da:

[17179588.992000] ivtv:  ==================== START INIT IVTV ====================
[17179588.992000] ivtv:  version 0.4.6 (tagged release) loading
[17179588.992000] ivtv:  Linux version: 2.6.15-26-386 preempt 486 gcc-4.0
[17179588.992000] ivtv:  In case of problems please include the debug info between
[17179588.992000] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with[17179588.992000] ivtv:  any module options, when mailing the ivtv-users mailinglist.
[17179589.536000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[17179589.536000] usbcore: registered new driver usblp
[17179589.536000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179589.664000] usbcore: registered new driver snd-usb-audio
[17179589.972000] AC'97 1 does not respond - RESET
[17179589.972000] AC'97 1 access is not valid [0xffffffff], removing mixer.
[17179589.972000] Unable to initialize codec #1
[17179590.016000] Real Time Clock Driver v1.12
[17179590.028000] intel8x0_measure_ac97_clock: measured 55068 usecs
[17179590.028000] intel8x0: clocking to 48000
[17179590.048000] ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
[17179590.048000] ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179590.048000] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[17179590.132000] Floppy drive(s): fd0 is 1.44M
[17179590.136000] input: PC Speaker as /class/input/input1
[17179590.144000] parport: PnPBIOS parport detected.
[17179590.144000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179590.192000] tveeprom: ivtv version
[17179590.192000] tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 8400430
[17179590.192000] tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38)
[17179590.192000] tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
[17179590.192000] tveeprom: audio processor = CX25843 (type = 25)
[17179590.192000] tveeprom: decoder processor = CX25843 (type = 1e)
[17179590.192000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
[17179590.196000] FDC 0 is a post-1991 82077
[17179590.204000] usbcore: registered new driver hiddev
[17179590.232000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
[17179590.232000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
[17179590.392000] input: Logitech USB Mouse as /class/input/input2
[17179590.392000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2
[17179590.400000] cx25840 1-0044: ivtv driver
[17179590.400000] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[17179590.436000] hiddev96: USB HID v1.10 Device [aqua computer aquaero 4.00] on usb-0000:00:13.2-2.1
[17179590.436000] usbcore: registered new driver usbhid
[17179590.436000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179592.568000] ts: Compaq touchscreen protocol output
[17179593.068000] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
[17179594.696000] NET: Registered protocol family 10
[17179594.696000] lo: Disabled Privacy Extensions
[17179594.696000] IPv6 over IPv4 tunneling driver
[17179594.888000] cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
[17179594.952000] ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
[17179594.992000] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
[17179595.000000] ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
[17179595.012000] tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
[17179595.012000] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
[17179595.680000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179595.896000] ivtv0: Encoder revision: 0x02050032
[17179595.896000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[17179595.896000] ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
[17179595.896000] ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
[17179595.896000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[17179595.896000] ivtv0: Create encoder radio stream
[17179595.896000] tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
[17179596.032000] ivtv0: Initialized WinTV PVR 150, card #0
[17179596.032000] ivtv:  ====================  END INIT IVTV  ====================

Ich glaube das läuft jetzt, aber bei xawtv bekomme ich keinen Kanal rein